Abstract:Die-less spinning is a typical incremental forming technology with flexible processing parameters, including the roller path and loading parameters, whose forming law changes dynamically and easy-to-produce defects of excessive thinning and flange wrinkling. This brings a great challenge to the process design of die-less spinning. In this study, we proposed a novel dynamic optimization approach and system considering the time-varying forming law for the processing parameters in die-less spinning. The idea of proposed approach is that simulating the spinning process step by step through autonomous finite element modeling, real-time extracting and modeling the simulated spinning status at each forming step to capture the time-varying forming law, then gradually optimizing the processing parameters through efficient multi-objective optimization algorithm. By conducting the proposed dynamic optimization approach to the first spinning pass of die-less spinning, series of polynomial response surface models (PRSM) of wall thickness and flange wrinkling at various forming steps were developed to describe the time-varying forming law. On this basis, the roller path and matching loading parameters in each step were gradually optimized through a differential evolution algorithm with the multiobjective of minimizing wall thickness reduction, reducing flange wrinkling and maximizing forming efficiency. The optimized process produced better spun part than the traditional spinning process, presenting the wall thickness reduction <= 5 % and the flange wrinkling <= 2.5 mm. Furthermore, the time-varying influence of processing parameters on the wall thickness and flange wrinkling were elucidated based on the PRSM of spinning status at various forming steps.

Optimum Design for the Dual Slot Die Parameters of Melt Blowing Process

Investigation into the effect of the angle of dual slots on an air flow field in melt blowing via numerical simulation

Design and analysis of the mandrel structure for a composite S-shaped inlet

Experimental Study of the Airflow Field and Fiber Motion in the Melt-Blowing Process

Influence of a Meltblown Die with a Laval Airstream Channel on the Manufacturing Process of a Polymer Fiber Based on an Orthogonal Test and Simulation Analysis

Lateral Diffusion of a Free Air Jet in Slot-Die Melt Blowing for Microfiber Whipping

Die Design and Process Optimization of Plastic Gear Extrusion

Optimal Design of Plastic Extrusion Dies Based on Flow Balance

Optimization Of The Flow Distribution In Extrusion Die Of Plastic Profile

Experimental and numerical study on flow characteristics of dual‐cavity die based on multi‐objective optimization

Dynamic Optimization of Die-Less Spinning Process Through Autonomous Modeling of Time-Varying Forming Law

Optimization of Control Parameters in Micro Hot Embossing

Optimization Design Method of Extrusion Die for Complex Profile

Numerical Simulation and Experimental Study of Polymer Micro Extrusion Flow

Inverse Design Simulations of Extrusion Die of Medial Lampshade

Optimized Design for a Combined Die with Two Stress Rings in Cold Forging Considering Thermal-Mechanical Effects

Optimization of Die Design for Thin-Walled Flat Multi-Port Tube with the Aid of Finite Element Simulation

Optimization of direct metal printing process parameters for plastic injection mold with both gas permeability and mechanical properties using design of experiments approach

Virtual orthogonal experiment study on needle piercing extrusion process of Inconel690 alloy large-diameter thick-walled tube

Stress Analysis and Optimum Design of Hot Extrusion Dies

Analysis and simulation of non-Newtonian flow in the coat-hanger die of a meltblown process