Abstract:In the present study, an electrochemical glucose biosensor has been developed based on nano-copper oxide micro hollow spheres. The nano-copper oxide micro hollow spheres were synthesized via hydrothermal method using pluronic F-127 as a surfactant. For structural characterization of CuO hollow sphere structures, the scanning electron microscopy and X-ray diffraction spectroscopy were applied. The performance parameters of the sensor were improved by optimizing the modification process. The electrochemical characteristics of the proposed glucose biosensor were investigated by using cyclic voltammetry and chronoamperometry techniques in both 0.1 M and 1 M NaOH solutions. The results revealed that the proposed electrode has a wide dynamic range from 1 µM to 11.50 mM for glucose detection at 0.1 M NaOH solution which covers two linear ranges from 1 µM to 3 mM and from 3 mM to 11.50 mM. The sensitivities of the two linear ranges were obtained as 25.0 ± 0.8 µA·mM−1·cm−2 and 13.6 ±0.3 µA·mM−1·cm−2, respectively. An extremely wide linear range from 1 µM to 16 mM with a sensitivity of 35.2 ± 0.4 µA·mM−1 cm−2 was achieved for the 1 M NaOH solution. The sensor achieved a 1 µM practical lowest limit of detection which is an excellent low limit of detection at both NaOH concentrations compared to some important previously reported works. In addition, the good tolerance toward the interfering species and the satisfactory behavior in real sample analysis verified the promising performance of the proposed sensor.

Fabrication of Nanoporous Copper Oxide Film Biosensor with a Polymer Sphere Template and Its Application to Glucose Sensing

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

3D CuO Nanosheet Wrapped Nanofilm Grown on Cu Foil for High-Performance Non-Enzymatic Glucose Biosensor Electrode

Construction of a non-enzymatic glucose sensor based on copper nanoparticles/poly( o -phenylenediamine) nanocomposites

Fabrication of Non-enzymatic Electrochemical Glucose Sensor Based on Nano-copper Oxide Micro Hollow-spheres

An Effective Non-Enzymatic Glucose Biosensor Based on Nanostructured Cu<sub>x</sub>O/Cu Electrodes Synthesized in Situ by Copper Anodization

Facile Synthesis of Novel CuO/Cu2O Nanosheets on Copper Foil for High Sensitive Nonenzymatic Glucose Biosensor

Fabrication of CuO Nanoplatelets for Highly Sensitive Enzyme-Free Determination of Glucose

An Effective Non-Enzymatic Glucose Biosensor Based on Nanostructured CuxO/Cu Electrodes Synthesized in Situ by Copper Anodization

Comparison of Copper(II) Oxide Nanostructures with Different Morphologies for Nonenzymatic Glucose Sensing

Nanoporous CuZn supported CuO nanoparticle electrodes for non-enzymatic electrochemical glucose detection

An Effective Non‐Enzymatic Glucose Biosensor Based on Nanostructured Cu <sub>x</sub> O/Cu Electrodes Synthesized in Situ by Copper Anodization

Uniform and Dense Copper Nanoparticles Directly Modified Indium Tin Oxide Electrode for Non-Enzymatic Glucose Sensing

Sandwich Nanoporous Framework Decorated with Vertical CuO Nanowire Arrays for Electrochemical Glucose Sensing

Highly Sensitive Enzyme-Free Glucose Sensor Based on CuO–NiO Nanocomposites by Electrospinning

Synthesis of Copper Nanoparticles in the Ordered Mesoporous Carbon (cu@omc) for Glucose Detection

Sensitive electrochemical nonenzymatic glucose sensing based on anodized CuO nanowires on three-dimensional porous copper foam

Controllable morphology engineering of Cu 2 O nanoparticles for non-enzymatic glucose sensing

Porous CuO Nanobelts Assembly Film for Nonenzymatic Electrochemical Determination of Glucose with High Fabrication Repeatability and Sensing Stability

Non-enzymatic glucose sensors based on controllable nanoporous gold/copper oxide nanohybrids.

Size Controlled Copper (I) Oxide Nanoparticles Influence Sensitivity of Glucose Biosensor.