Abstract:It is widely thought in electro-biochemical analysis that the sensing interfaces play a key role in the enzymeless detection of biomolecules like glucose, ascorbic acid, dopamine and uric acid. On the way to maximize the anti-poisoning sensitivity of nonenzymatic electrochemical glucose sensors as well as achieve favorable selectivity, we propose here a porous interface fabricated by a facile but effective approach for glucose monitoring in alkaline media containing dissolved oxygen. The sensing interface based on porous Cu foams is directly formed on a homemade disposable screen-printed carbon electrode (SPCE) substrate by electrodeposition assisted with hydrogen evolution simultaneously, and its porosity can be easily tailored through adjusting deposition conditions for the optimal electrocatalytic oxidation of glucose molecules. SEM and BET studies show that the generated Cu foam possesses robust hierarchical porous architectures with greatly enhanced surface area and pore volume, beneficial for the unimpeded mobility of glucose and reaction products. Cyclic voltammetric tests indicate that a diffusion-controlled glucose electro-oxidation reaction occurs at the Cu foam electrode at around +0.35 V vs. Ag/AgCl in 0.1 M NaOH. Chronoamperometric results obtained under optimized conditions reveal that the proposed sensor exhibits desired poison resistance ability in the presence of chloride ions and significant selectivity to glucose, providing fascinating sensitivities of 2.57 and 1.81 mA cm(-2) mM(-1) for glucose in the linear concentration ranges of 2-80 μM and 0.1-5 mM, respectively. The limit of detection is calculated to be as low as 0.98 μM according to the signal-to-noise ratio of three. In addition, the fabricated sensing interface shows attractive reproducibility (RSD of 5.1% and 7.0% for 15 repeated measurements on a sensor and for measurements on 15 prepared sensors, respectively) and outstanding long-term stability (less than 5% loss in sensitivity over 1 month) for glucose detection. The application of the Cu foam based sensor for monitoring glucose in practical samples is also successfully demonstrated.

Sensitive electrochemical nonenzymatic glucose sensing based on anodized CuO nanowires on three-dimensional porous copper foam

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

Three-Dimensional Copper Foam Supported Cuo Nanowire Arrays: an Efficient Non-Enzymatic Glucose Sensor

CuO nanowires based sensitive and selective non-enzymatic glucose detection

3D Copper Foam-Supported CuCo2O4 Nanosheet Arrays As Electrode for Enhanced Non-Enzymatic Glucose Sensing

Ultrasensitive non-enzymatic glucose sensor based on three-dimensional network of ZnO-CuO hierarchical nanocomposites by electrospinning

A Non-Enzymatic Glucose Sensor Based on Copper Oxide Nanowires-Singlewall Carbon Nanotubes

Ultrasensitive and Selective Non-Enzymatic Glucose Detection Using Copper Nanowires.

A Highly Sensitive Non-Enzymatic Glucose Sensor Based on CuS Nanosheets Modified Cu2O/CuO Nanowire Arrays

A Sensitive and Selective Non-Enzymatic Glucose Sensor Based on AuNPs/CuO NWs-MoS2 Modified Electrode

An Integrated Anode Based on Porous Ni/Cu(OH)2 Nanospheres for Non-Enzymatic Glucose Sensing

3D CuO Nanosheet Wrapped Nanofilm Grown on Cu Foil for High-Performance Non-Enzymatic Glucose Biosensor Electrode

Nanorod-aggregated flower-like CuO grown on a carbon fiber fabric for a super high sensitive non-enzymatic glucose sensor

Electrochemical Sensing Interfaces with Tunable Porosity for Nonenzymatic Glucose Detection: A Cu Foam Case

CuO/Cu2O nanofibers as electrode materials for non-enzymatic glucose sensors with improved sensitivity

A Vertically Aligned CuO Nanosheet Film Prepared by Electrochemical Conversion on Cu-based Metal-Organic Framework for Non-Enzymatic Glucose Sensors

An improved sensitivity non-enzymatic glucose sensor based on a CuO nanowire modified Cu electrode.

Direct Growth of Pod-Like Cu2o Nanowire Arrays on Copper Foam: Highly Sensitive and Efficient Nonenzymatic Glucose and H2o2 Biosensor

High-performance Electrochemical Glucose Sensing Enabled by Cu(TCNQ) Nanorod Array

Copper@carbon coaxial nanowires synthesized by hydrothermal carbonization process from electroplating wastewater and their use as an enzyme-free glucose sensor.

Anneal-shrinked Cu2O Dendrites Grown on Porous Cu Foam As a Robust Interface for High-Performance Nonenzymatic Glucose Sensing.