Abstract:Atomic magnetometers (AMs) that use alkali vapors, such as rubidium, are among the most sensitive sensors for magnetic field measurement. They commonly use polarization differential detection to mitigate common-mode noise. Nevertheless, traditional differential detection optics, including polarization beam splitters (PBS) and half-wave plates, are typically bulky and large, which restricts further reductions in sensor dimensions. In this study, a combination of liquid crystal polarization grating (LCPG) and liquid crystal quarter-wave plate is used for differential detection in AMs, with magnetic field strength determined by measuring the intensity of two diffracted beams from the LCPG. The experimental findings indicate that the fabricated LCPG exhibits a circularly polarized extinction ratio of 3,656 and achieves an average diffraction efficiency of 99 %. In addition, the differential detection method based on LCPG can achieve an angular resolution of 1.48 × 10 −7 rad. Subsequently, the method is employed in an AM to achieve an average magnetic sensitivity of 13.8 fT/Hz 1/2 . Compared to the PBS-based differential detection method, this method enhances the magnetometer response coefficient by 13 % and achieves co-side distribution of the two diffracted beams, thereby avoiding the need for additional vertical optical paths. The effective thickness of the detection optics is reduced to the micrometer scale, allowing for future integration as thin films onto microfabricated vapor cells. This study offers a practical solution for miniaturized AMs with exceptionally high sensitivity.

Measurement of linearly polarized light rotation applied in atomic magnetometer

Experimental Demonstration of Light Narrowing Effect Based on Free Atomic Spin Precession

In-situ Measurement of the Electron Spin Polarization by Controlling Its Distribution in Atomic Ensembles

A 85 Rb transverse modulation magnetometer in geophysical range based on atomic alignment states

All-optical dual-axis zero-field atomic magnetometer using light-shift modulation

Polarisation of radio-frequency magnetic fields in magnetic induction measurements with an atomic magnetometer

[The Measuring Method of Atomic Polarization of Alkali Metal Vapor Based on Optical Rotation and the Analysis of the Influence Factors].

A polarimeter based on electric-optical material

Measurement Instrument For All-Polarization Image Information Based On Electro-Optic Modulation

Three axis vector atomic magnetometer utilizing polarimetric technique

Zero-field optical magnetometer based on spin-alignment

Light-shift-free and dead-zone-free atomic orientation based scalar magnetometry using a single amplitude-modulated beam

Reflected Atomic Magnetometer With Single Beam

Integrated optical rotation detection scheme for chip-scale atomic magnetometer empowered by silicon-rich SiNx metalens

Sensitivity Enhancement of a Dead-Zone Free All-Optical 4he Atomic Magnetometer Based on a Liquid-Crystal Polarization Rotator

Circularly Polarized Light to Study Linear Magneto-Optics for Ferrofluids:Θ-Scan Technique

Ultra-compact and high-precision differential detection method based on liquid crystal polarization grating for miniature atomic magnetometer

Vector measurements using all optical scalar atomic magnetometers

Elliptically Polarized Laser-Pumped Mx Magnetometer Towards Applications at Room Temperature

Amplitude Dependence on Probe Frequency Detuning in Faraday-rotation Alkali Atomic Magnetometers

An Integrated Single-Beam Three-Axis High-Sensitivity Magnetometer