Deformation analysis of steel-bamboo composite slab considering slip effect

Jun Guo,JiaLiang Zhang,Yu Wen,Junguo Huang,Yushun Li

2013-01-01

Abstract:In order to investigate the slip effect on the mid-span deformation of steel-bamboo composite slabs, Flexural performance experiments of six composite slabs were carried out. Behavior of the tested composite slabs including failure modes, load carrying capacity, mid-span deformation and relative interface slip was studied. The specimens was divided into two groups. One group only used the structural adhesive at the interface to bond the cold-formed thin-walled steel and bamboo plywood together. The other group utilized self-tapping screws for improving the bonding effect between steel and bamboo in addition to structural adhesive. Based on the theory of elastic body deformation and the hypothesis that the interfacial shear force is proportional to the slippage, the calculation formula of mid-span deformations under symmetrical load was developed for simply supported steel-bamboo composite slabs. The results of test and theoretical analysis indicate that there exists a good agreement between the calculated and experimental values of the mid-span deformation considering slip effect in composite slabs in the first group. Since the additional deformation is considered, the precision of theoretical calculation is improved by about 5% comparing with the transformed section method. The ultimate strength with self-tapping screws is increased a lot in the second group. The introduction of the coefficient of plasticity development based on the built theoretical calculation method achieves the well fitting of theoretical calculation of mid-span deformations and experimental results.