Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Microstructural and Mechanical Characterization of Multiphase Nb-based Composites from Nb–Ti–C–B System

Effect of TiB_2 content on microstructure and mechanical properties of in-situ fabricated TiB_2/B_4C composites

Microstructural Characterization and Mechanical Properties of Nb–Ti–C–B In-Situ Composites with W Addition

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite

In-situ Precipitated Network Structure and High-Temperature Compressive Behavior of Nb–Ti–C–B Composites

Novel Α/β SiC-(Ti, Nb)B2 Toughened (ti, Nb)C-based Composites with Enhanced Mechanical Properties Fabricated by in Situ Reactions Sintering at Low Temperature

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles

MICROSTRUCTURAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF A Nb/Nb5Si3 BASED COMPOSITE WITH AND WITHOUT DIRECTIONAL SOLIDIFICATION

Effect of Nb addition on microstructure and mechanical properties of TiC/Ti-7.8Cr composites

Effect of Mo on Microstructure and Mechanical Properties of Nb–Ti–C–B Multiphase Alloy

The investigation on the fabrication and microstructure of NbTi-(NbTi)C Fe-based composite

Outstanding strength and toughness in graphene reinforced Nb/Nb5Si3 composites with interfacial nano-phases

Effect of NbC Content on Microstructure and Mechanical Properties of W-NbC Composites

Microstructures and Mechanical Properties of TiAl Matrix Composites with Multi-Precipitates Quasi-Continuous Network Reinforced Structures

Microstructure and Mechanical Properties of Dual Scaled NbC/Ti2AlC Reinforced Titanium–Aluminum Composite

Mechanical properties of Nb based multiphase alloy studied by nanoindentation and atomic force microscopy

Effect of Volume Fraction of Reinforcement on Microstructure and Mechanical Properties of In Situ (Ti, Nb)B/Ti2AlNb Composites with Tailored Three-Dimensional Network Architecture

Improved microstructure and mechanical properties by in-situ formed nano borides of high-Nb TiAl composites under ultrasound in the solid-liquid two-phase region

Microstructure and mechanical properties of MoNbW(TaC)x composites

Microstructure and Mechanical Properties of ZrB2–Nb Composite

Effects of Niobium and Ultrasonic Action Coupling on Microstructure Evolution and Mechanical Properties of Ti46Al2.6 C Alloy