Abstract:The proton-exchange membrane fuel cell (PEMFC) bipolar plate serpentine flow channel U-shaped region is prone to the accumulation effect, which poses serious difficulties for fuel cell water management. As a result, a deep understanding of water transport in the U-shaped region is essential to improve the fuel cell performance. Under this direction, in this work, the impact of the different microstructure parameters and initial conditions on water transport in the U-shaped region was compared with and without microstructure using the volume of the fluid method. On top of that, the velocity field distribution in the X-direction and the pressure drop distribution in the flow channel were also analyzed. From the acquired results, it was demonstrated that due to the secondary flow caused by the bending property of the microstructure, the droplet movement time in the U-shaped region was significantly shortened after the microstructure was added in the U-shaped region. The initial conditions strongly affected the droplet motion, and a larger contact angle enhanced the wall hydrophobicity to facilitate the droplet discharge. An increase in the droplet diameter led also to a rise in the windward area and shear force, which shortened droplet discharge time. Interestingly, if the waveform microstructure has too-large crests, gullies will be created that will impede the droplet motion and increase the amplitude of the droplet oscillation, resulting in excessive pressure drop in the flow channel. A too-large period led to increased droplet momentum loss, whereas a short period reduced the wall contact angle, which is not conducive to drainage. The microstructure spacing significantly affected the droplet motion, and the reduced spacing increased the airflow diffusion effect to accelerate the flow rate. The main focus of this work was led on the application of the microstructure in a U-shaped region of the serpentine flow channel, which is of great specific significance for droplet removal inside the flow channel.

Effects of Anode Serpentine Flow Fields on the Performance of Μ-Dmfc

An Analytical Model for Parametric Study on Serpentine and Interdigitated Flow Fields in Redox Flow Batteries

Effect of anode flow field on silicon-based µDMFC

Anode Flow Field Structures of Micro Direct Methanol Fuel Cell

Effects of anode flow field design on the performance of micro direct methanol fuel cell

Three-dimensional detached serpentine flow field design for redox flow batteries

Investigation Of Mass Transport And Cell Performance On Mu Dmfc With Different Anode Flow Fields

Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel

Design and Simulation of Air-Breathing Micro Direct Methanol Fuel Cells with Different Anode Flow Fields.

Experimental Investigations of the Anode Flow Field of A Micro Direct Methanol Fuel Cell

The Effect of Different Flow Patterns on Anode Fluid Behaviors of Micro Direct Methanol Fuel Cells

Numerical Investigation of PEMFC Performance Based on Different Multistage Serpentine Flow Field Designs

A Tapered Serpentine Flow Field for the Anode of Micro Direct Methanol Fuel Cells

Numerical Analysis of Different Multi-serpentine Flow Fields for Proton Exchange Membrane Fuel Cells

Effect of Anode Flow Pattern Design on the Performance of Micro Air-Breathing DMFC

Experimental Investigations of Anode Structure on the Performance of Air-Breathing Μdmfc

Enhancing the performance of direct methanol fuel cells using new cathode flow field designs: An experimental investigation

Numerical study of serpentine flow field designs effect on proton exchange membrane fuel cell (PEMFC) performance

Numerical Study on the Performance of Fuel Cell with a Radial Serpentine Flow Field

Local Transport Phenomena and Cell Performance of PEM Fuel Cells with Various Serpentine Flow Field Designs

Effects of Three-Dimensional Type Flow Fields on Mass Transfer and Performance of Proton Exchange Membrane Fuel Cell