Abstract:Vibrations in rotating machinery cause many problems such as excessive noise and the vibration transmission to the supporting structure. In addition, the vibration isolation of the machinery with a wide range of rotational speed is a vital requirement and different to realize in practical engineering. As one of the key components in rotating machinery, bearing is not only the major vibration excitation source, but also the main vibration transmission path. Therefore, the mechanical property of the bearing has a significant effect on the vibration of the rotating machinery. Compared with traditional mechanical bearing, the equivalent stiffness and damping of magnetic bearing can be changed by adjusting its control parameters. On this basis, a novel design strategy of parameters switched magnetic bearing and high static low dynamic stiffness (HSLDS) supports for the vibration isolation of rotating machinery is proposed in this article. The design changes the equivalent linear stiffness and damping of the magnetic bearing by adjusting the control parameters according to the rotor speed, which will improve the vibration isolation capability of magnetic bearing at different rotor speed. Meanwhile, to further reduce the vibration transmission, the rotating machinery was suspended by nonlinear isolator with high static low dynamic stiffness characteristic. As an example, a rotating machinery system consisting of a rigid rotor supported by parameters switched magnetic bearings and high static low dynamic stiffness supports is studied. In this model, the rotor is excited by the unbalance force with different rotational speed. The amplitude of force acted on the base and the maximum relative displacement between the journal and the bearing are used to judge the isolation performance. Simulation results show that the demonstrated the effectiveness of this design strategy and the force transmission is significantly reduced with a wide rotational speed range.

Study on the vibration attenuation capability of rotating machinery supported by active magnetic bearings

Experimental Investigation on Dynamic Behaviour of Active Magnetic Bearing-Rotor System Subject to Base Vibration

Vibration transmission characteristics of active magnetic bearings

A measurement method for support characteristics of active magnetic bearings based on multi-DOF rotor system model

Vibration Control of Base-Excited Rotors Supported by Active Magnetic Bearing Using a Model-Based Compensation Method

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Matching Design of Active Magnetic Bearing and Elastic Support Vibration Isolator

Non-contact Rotor Vibration Velocity Sensor and Its Application to Vibration Control of a Flexible Rotor on Active Magnetic Bearings

Vibration Isolation of Rotating Machinery by Control Parameters Switched Magnetic Bearing

Dynamic analysis and vibration control of a rotor-Active magnetic bearings system with base motion

Vibration Suppression of Base-Excited Rotors Supported by Active Magnetic Bearings Based on an Augmented Kalman Compensator

Vibration Modal Analysis of the Active Magnetic Bearing System

Automatic Measurement of Stiffness and Damping of Active Magnetic Bearings

Vibration Isolation of Rotating Machinery by Parameters Switched Magnetic Bearing and High Static Low Dynamic Stiffness Supports

Unbalance Compensation for Active Magnetic Bearing Rotor System Using a Variable Step Size Real-Time Iterative Seeking Algorithm.

Vibration Suppressing with Mixed Weight for Multi-Targets in Active Magnetic Bearing-Flexible Rotor System

Active Control of Bearing Force Transmissibility for Active Magnetic Bearings-rigid Rotor Systems

Synchronous Vibration Control for Magnetically Suspended Rotor System Using a Variable Angle Compensation Algorithm.

Current Compensation Control of Multiple Frequency Vibrations of the Rotor in Active Magnetic Bearing High Speed Motors

Vibration Isolation Optimized Design of Magnetic Suspended Pump

A Controllable Flexible Backup Bearing for Active Magnetic Bearings