Abstract:Abstract The aviation large panel is an important component that constitutes the aerodynamic shape of the aircraft. It has the characteristics of large size, thin wall and weak rigidity. It is prone to produce assembly deformation during the automatic drilling and riveting assembly connection process, including the overall bending and torsion deformation of the panel, and the defects around the rivet. In this paper, through the test of automatic drilling and riveting assembly of large panels, a local sinking deformation along the axis of the long stringer is found. The cause of this deformation problem is complex and directly affects the subsequent assembly process. It is a strong coupling problem between the automatic drilling and riveting process and the elastic-plastic deformation of the rivet and its connected parts, and it has a high correlation with the meso-structure of the plate structure around the nail hole after the rivet is riveted. Aiming at this deformation problem, this paper first established a process model of the riveting process and designed riveting test pieces with different process parameters. The effects of riveting force, riveting process time, and upper riveting cavity on the meso-structure of the riveting area are explored, and the correlation between the meso-structure of the riveting area and the riveting process parameters is analyzed. Then, based on the above research, a finite element numerical model of a typical aircraft siding riveting component structure including meso-structure is established. Through the finite element simulation calculation of the model, the coupling relationship between macroscopic deformation and mesoscopic structure is further explored, the existence of local subsidence and deformation along the axis of the long truss is verified.

Research on the Maximum Riveting Force Based on Theory of Compression Instability

Influence of the Deformation of Riveting-Side Working Head on Riveting Quality

Experiment and Numerical Simulations of a Slug Rivet Installation Process Based on Different Modeling Methods

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Local-global Method to Predict Distortion of Aircraft Panel Caused in Automated Riveting Process

Study on Analysis and Prediction of Riveting Assembly Variation of Aircraft Fuselage Panel

An Effective Theoretical Model for Slug Rivet Assembly Based on Countersunk Hole Structure

Deformation Prediction and Compensation of a Dual-Machine Riveting System for Aircraft Assembly

Effect of Interference Fit Size on Local Stress in Single Lap Bolted Joints

Effect of Riveting Parameters on the Quality of Riveted Aircraft Structures with Slug Rivet

Dynamic Modeling and Sensitivity Analysis of Dual-Robot Pneumatic Riveting System for Fuselage Panel Assembly

Study on the Mechanism of Cumulative Deformation and Method for Suppression in Aircraft Panel Riveting

Investigation on the Residual Stresses and Fatigue Performance of Riveted Single Strap Butt Joints

Analytical Modeling of Riveting Squeezing Force Considering Non-Uniform Deformation of Rivets in Aeronautical Structures

Rivet Structural Design and Process Optimization for the Double-Sided Countersunk Riveting of Composite Wedge Structures

Finite element analysis of self-piercing riveting process

Influence of Rivet Diameter and Pitch on the Fatigue Performance of Riveted Lap Joints Based on Stress Distribution Analysis

Simulation and Analysis of Self-Piercing Riveting Process in Aluminum Sheets

Optimization of Riveting Assembly Process Parameters for Aviation Large Panels Based on Mesoscopic Features

Effect of Riveting Angle and Direction on Fatigue Performance of Riveted Lap Joints