Abstract:<p>Nowadays, the Riv(et)-Bonding technique has become a major joining approach in the automotive industry. It effectively incorporates the benefits of the adhesive bonding and the self-pierce riveting (SPR), but overcomes their individual drawbacks. Finite element (FE) simulation of the SPR process now plays a very important role during the product design and manufacture processes in the automotive field. However, there is no reported progress in the simulation of the Riv-Bonding process. To deepen understandings of this joining method, a FE model of the Riv-Bonding process suitable for industrial applications was developed in this study. The Ostwald-de Waele power law was adopted to approximately represent properties of the adhesive SikaPower 498. Interrupted laboratory tests of the SPR process and the Riv-Bonding process were carried out to calibrate the FE model, and another eight types of joints were experimentally made to verify the effectiveness of the developed model. Meanwhile, the effects of the adhesive layer on the joint quality and the riveting process were analysed by comparing the interrupted test results of the two processes. The adhesive distribution during the Riv-Bonding process was also discussed. The developed model was proven capable of predicting the Riv-Bonding process, including the adhesive distribution, the solid parts deformation and the load-displacement curve. Unlike the SPR simulation, the blank-holder strike during the clamping stage should be properly modelled in the simulation model of the Riv-Bonding process, due to its noticeable influences on the adhesive distribution as well as on the top sheet deformation. It was also found that, under the studied joint configuration, the adhesive layer demonstrated slightly negative effects on the riveted connection of the Riv-Bonded joints. The simulation model developed in this study lays a foundation for further quality prediction and mechanical strengths modelling of the Riv-Bonded joints.</p>

Finite element analysis of self-piercing riveting process

Simulation and Analysis of Self-Piercing Riveting Process in Aluminum Sheets

Experiment and Numerical Simulations of a Slug Rivet Installation Process Based on Different Modeling Methods

Elastic-plastic Analysis and Riveting Energy Control for Dual-Robot Pneumatic Riveting System

Finite element modeling and analysis of the self-piercing riveting forming process with the ball-shaped die

Influence of the Deformation of Riveting-Side Working Head on Riveting Quality

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Numerical Simulation and Experiment of Self-Piercing Riveting with Solid Rivet Joining Multi-Layer Aluminum Sheets

Local-global Method to Predict Distortion of Aircraft Panel Caused in Automated Riveting Process

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Equivalent characterization of pre-strained material properties and mechanical behavior prediction of steel/aluminum self-piercing riveted joints

Strength modeling of Al-alloy sheet self-piercing riveting considering different failure modes

Shear strength and failure mode of self-piercing riveted similar and dissimilar materials

Modelling and interaction analysis of the self-pierce riveting process using regression analysis and FEA

Experimental and numerical investigation on the effect of process parameters on joint strength and failure behavior of self-piercing riveted steel/aluminium hybrid joints

Material-structure-process-performance integrated optimization method of steel/aluminum self-piercing riveted joint

Experimental and Numerical Investigations on the Impact of Surface Conditions on Self-Piercing Riveted Joint Quality

Numerical simulation and experimental validation of self-piercing riveting (SPR) of 6xxx aluminium alloys for automotive applications

Numerical modelling and experimental investigation of the Riv-Bonding process

Numerical investigation of joinability and forming quality improvement on self-piercing riveting process with varying sheet stack combinations

Distortion Analysis for Self-Piercing Riveting of Aluminium Alloy Sheets