Abstract:A high precision and high resolution time-to-digital converter (TDC) based on multichain measurements averaging method is implemented in a 40 nm fabrication process Virtex-6 FPGA. The results of the detailed theoretical analysis and the simulation with the MATLAB tool based on a complete TDC module show that the resolution limitation determined by the intrinsic cell delay of plain tapped-delay chain can be overcame, which results in an improvement on both resolution and precision without increasing the dead time. The test results agree with the simulation results quite well. In such a TDC, the input signal is connected to multiple tapped-delay chains simultaneously (the number of the chains is M), and each chain is just a plain TDC and generates a timestamp for a hit signal. Therefore, M timestamps should be obtained in total, which, after averaging, give the final timestamp. A TDC with 1.7 ps equivalent bin size, 1.5 ps averaged bin size and 4.2 ps RMS has been implemented with M being 16, which performs much better than the plain TDC constructed of a single tapped delay chain having 42.3 ps equivalent bin size, 24.0 ps averaged bin size resolution and 13.2 ps RMS precision. The comparisons of equivalent bin size and averaged bin size show that the nonlinearity is improved with a larger M. Due to the real time integral nonlinearity (INL) calibration and averaging calculation, the multichain TDC is almost insensitive to the process voltage and temperature (PVT) variations.

Multi-Time Averaging Tdcs Implemented in an Actel Flash-Based Fpga

The 10-Ps Multitime Measurements Averaging TDC Implemented in an FPGA

A Multi-chain Measurements Averaging TDC Implemented in a 40 nm FPGA

A 1.7 Ps Equivalent Bin Size and 4.2 Ps RMS FPGA TDC Based on Multichain Measurements Averaging Method

A Low Dead Time Vernier Delay Line TDC Implemented in an Actel Flash-Based FPGA

A 16-Channel 15 Ps TDC Implemented in a 65 Nm FPGA

A Multi-Chain Merged Tapped Delay Line for High Precision Time-to-Digital Converters in FPGAs

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

Development of a High Resolution TDC for Implementation in Flash-Based and Anti-Fuse FPGAs for Aerospace Application

Implementation of a High Precision Multi-Measurement Time-to-digital Convertor on a Kintex-7 FPGA

A Resource-Saving Dual Channel Time-to-digital Converter with Shared Tapped Delay Line in FPGAs

A 3.9 ps RMS resolution time-to-digital converter using dual-sampling method on Kintex UltraScale FPGA

A 3.9 Ps Time-Interval RMS Precision Time-to-Digital Converter Using a Dual-Sampling Method in an UltraScale FPGA

A 4.2 Ps Time-Interval Rms Resolution Time-To-Digital Converter Using A Bin Decimation Method in an Ultrascale Fpga

A High-Resolution Tdc Implemented In A 90nm Process Fpga

A High Precision Time-to-Digital Converter based on Multi-chain Interpolation with a Low Cost Artix-7 FPGA

A high-resolution time-to-digital converter based on multi-phase clock implement in field-programmable-gate-array

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

A New Method of Implementing Vernier TDC in a Xilinx Kintex-7 FPGA

A 128-Channel High Performance Time-to-Digital Converter Implemented in an UltraScale FPGA

A High Precision Time-To-Digital Converter Based on Multi-Phase Clock Implemented Within Field-Programmable-Gate-Array