Abstract:To accurately determine the true strain-rate effect of granite in split Hopkinson pressure bar (SHPB) tests, systematic experimental studies from quasi-static to dynamic loading on the same batch of granite samples is required. Therefore, firstly, splitting, uniaxial and triaxial compression tests were used to study the mechanical response of granite under different static stress conditions with the MTS rock mechanics test system, and the impact compression tests were performed at different strain-rates by the split Hopkinson pressure bar (SHPB). The test results show that the compressive strength increases with the increase of confinement, but the increase rate decreases as the confinement gets larger. The axial failure strain also increases with the increase of confinement. Failure is related to the composition and structure of granite, as well as the stress state. With increasing confinement, the sample is more constrained, the elastic limit strain becomes smaller, and the elastic modulus becomes larger accordingly. In addition, shear slip failure takes place under triaxial compression. In the dynamic compression tests, the strain-rate affects not only the strength of granite, but also the degree of fragmentation and the breaking pattern. Also, it has been found that the dynamic compressive strength enhancement of rocks under impact loading is due to the combined effects of the material strain-rate, lateral inertia and end friction; however, in SHPB tests they are coupled together and could not be separated from each other. To determine the material strain-rate effect of rocks in the SHPB tests, the dynamic compressive strength enhancement caused by the lateral inertial effect and end friction effect needs to be removed. Assuming that the effect of the material strain-rate, lateral inertia and end friction is uncoupled, the numerical simulation method has been employed to simulate the SHPB tests on granite. The true strain-rate effect of granite in SHPB tests is thus determined.

A Correction Methodology to Determine the Real Strain-rate Effect for Rock-like Materials Based on SHPB Testing

Obtaining Constitutive Relationship for Rate-Dependent Rock in SHPB Tests

A modified method for estimating the stress state of granular materials in the passive confined pressure SHPB tests

A Method for Testing Dynamic Tensile Strength and Elastic Modulus of Rock Materials Using SHPB

Numerical Simulation of the Rock SHPB Test with a Special Shape Striker Based on the Discrete Element Method

Strain-rate effect of polymers and correction methodology in a SHPB test

On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains

Experimental Study on Granite and the Determination of Its True Strain-Rate Effect

Strain rate effect of concrete based on split Hopkinson pressure bar (SHPB) test

LOADING CONDITION FOR SPECIMEN DEFORMATION AT CONSTANT STRAIN RATE IN SHPB TEST OF ROCKS

A novel method for determining strain rate of concrete-like materials in SHPB experiment

Strain rate design in SHPB test

Numerical Investigation on the Necessity of a Constant Strain Rate Condition According to Material’s Dynamic Response Behavior in the SHPB Test

A modified triaxial split Hopkinson pressure bar (SHPB) system for quantifying the dynamic compressive response of porous rocks subjected to coupled hydraulic-mechanical loading

Experimental and numerical investigation of crack propagation and dynamic properties of rock in SHPB indirect tension test

Dynamic Response of Rock-like Materials Based on SHPB Pulse Waveform Characteristics

Numerical Investigation on the Dynamic Strength and Failure Behavior of Rocks under Hydrostatic Confinement in SHPB Testing

Numerical simulation on rock failure under combined static and dynamic loading during SHPB tests

Investigation of Rock Material under Combined Compression and Shear Dynamic Loading: an Experimental Technique

Experimental and Numerical Study of Fracture Behavior of Rock-Like Material Specimens with Single Pre-Set Joint under Dynamic Loading