Abstract:In the field of non-destructive evaluation (NDE) of solid metal materials, it has been a challenge to detect surface and internal defects simultaneously by using a single physical mechanism technique. Conventionally, different testing techniques, in which each one is particularly sensitive to a certain type of defect, are employed to gain full defect information. However, a separated testing method is always a time-consuming and laborious work. Here, we report a magnetoelectric-ultrasonic hybrid transducer and multimodal system for quantitative NDE of metal, which integrates a magnetoelectric composite wrapped with a coil for generating alternating current field and simultaneously measuring magnetic abnormal of surface defects (referred to as ME-ACFM) and a dual-piezoceramic ultrasonic transducer (DP-UT) for generating acoustic pulses and detecting the echo signal of internal defects, respectively. A bipulse signal with different pulse widths is used for excitation of the hybrid transducer, in which one is corresponded to the resonant frequencies of 5 MHz for DP-UT, and another to 122 kHz for ME-ACFM. The huge difference between two resonant frequencies is helpful for restraining signal interference each other. Experimental investigations show that when scanning the tested specimens (standard steel No.45 and aluminum plates), the surface and internal defects information can be obtained simultaneously almost without a dead zone. The surface defect resolutions of 0.1 mm width and 0.1 mm depth, and the inside defect resolution of 2 mm blind hole are obtained; the experimental errors for surface defect (crack) depth up to 5 mm are around 5 %; while experimental errors for ultrasonic depth measurement (with a blind zone of 1.25 mm) is less than 0.63 mm. The proposed hybrid transducer and multimodal system open up a new way for designing multi-physical mechanism based NDEs.

Magneto-Optic Microscope Technology for Nondestructive Testing

Enhanced magneto-optic imaging system for nondestructive evaluation

Application of the Magneto-Optic Faraday Effect in NDT

Magneto-optic microscope for visually detecting subsurface defects.

Enhanced Laser-Based Magneto-Optic Imaging System for Nondestructive Evaluation Applications

Principles of Magneto-Optic Imaging and Its Applications

Nondestructive Testing and Transient Electromagnetic-Thermal NDT

Detection and classification of invisible weld defects by magneto-optical imaging under alternating magnetic field excitation

A Structural Health Monitoring Method Based on Magneto-Optic Imaging Technology

Research on visual detection technology using eddy current magnet excitation device

Modeling for detecting weld defects based on magneto-optical imaging

Visual detection of the subsurface defects using magneto-optical microscopy

Quantitative Nondestructive Evaluation of Mechanical Damages Based on the Phenomena of Natural Magnetization

Advances and Evaluation of Metal Magnetic Memory NDT Technique

Eddy Current Imaging Techniques for NDT&E Applications

Research progress on magnetic memory nondestructive testing

Research on Subsurface Detection Using Magneto-optic Microscopy System

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

A magnetoelectric-ultrasonic multimodal system for synchronous NDE of surface and internal defects in metal

Visual Detection of Sub‐surface Defects Using Enhanced Eddy Current Microscope

An Innovative Exciting Coil Design for Magneto-Optic Imaging in Nondestructive Evaluation.