Abstract:The performance of telescopes, important components of space interferometry systems, directly affects the accuracy of gravitational wave signals. Space gravitational wave telescopes typically employ an off-axis four-mirror system. When aligned, this system not only has multiple misalignments, but also exhibits interrelated aberrations from various misalignments. These characteristics may lead to difficult alignment of the telescope system as well as significant deviation between the position of the telescope after alignment and the ideal position. To address the aforementioned issues, first, a sensitivity matrix equation was established between the misalignment of optical components and the Fringe Zernike coefficients. Based on the sensitivity matrix equation, a damping least-squares evaluation function was constructed to reduce the significant deviation between the aligned and ideal positions. Second, a typical optical system of a space gravitational wave telescope was designed, and the sensitivity matrix was calculated. The relationship between the wavefront distortions caused by misalignments in each optical component was examined. To simplify telescope installation, a strategy using secondary mirrors as compensatory elements was proposed. Finally, to verify the effectiveness of the scheme, 200 sets of tolerance files were randomly generated. Based on the evaluation function of the damping least-squares method, a reasonable damping factor was set to limit the solution range of the misalignment amount, which enabled calculating the secondary mirror compensation amount. Experimental results indicate that after aligning the 200 random telescope files, the root-mean-square wavefront error was reduced to less than 0.0030λ, and the maximum error between the magnification after alignment and the ideal position magnification was only 0.57%, which confirms the feasibility of this alignment scheme.

Numerical Calculation of Misaligned Optical System under Interference Vibration

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

Influences of Misalignment Errors of Optical Components in an Orthogonal Two-Axis Lloyd's Mirror Interferometer.

Uncertainty Evaluation and Optimization of INS Installation Measurement Using Monte Carlo Method

Angle error from vibrating in tri-axial interferometric fiber optic gyroscopes and the evaluation with dual-laser Doppler vibrometers

Dynamic Characteristics, Analysis, and Measurement of a Large Optical Mirror Processing System

Practical and Accurate Method for Aspheric Misalignment Aberrations Calibration in Non-Null Interferometric Testing

Integrated modeling and analysis of the microvibration effects on the line-of-sight stability for the space laser communication terminal

Micro-vibration measuring technology based on heterodyne interference

Error analysis on assembly and alignment of laser optical unit

Simulation alignment of optical system for space gravitational wave telescope

OPTICAL SYSTEM MISALIGNMENT SOLUTION-BASED METHOD FOR EVALUATING STABILITY OF OPTICAL-MECHANICAL STRUCTURE

Vibration Modelling and Verification for Rotor-Support-Casing Coupling System with Misalignment Fault

An algorithm for the compensation of geometrical error in laser interferometer measurement

Misalignment Correction Method of Space Optical System on Orbit

Numerical calculation and analysis of dynamic MTF

Correction of error induced by nonlinear movement of feedback mirror in laser feedback stress measurement system

Modeling And Simulation Of Dynamic Errors In A Coordinate Measuring Machine With 3-Dof Laser Interferometer

Numerical Simulation Analysis Of Portable High-Speed Ftir Rotary Interferometers

Study on the Measurement of the Dynamic Misalignment Angle of the Centrifuge

Design of a high-precision and non-contact dynamic angular displacement measurement with dual-Laser Doppler Vibrometers