Abstract:Polymer electrolyte membrane fuel cells (PEMFCs) has been widely considered as the most promising power sources for electric vehicles due to their ultimate cleanness, high efficiency and fast refueling. Recently, the increased scalability of power and energy in fuel cells has made the PEMFC an ideal power plant for heavy-duty vehicles (HDVs), i.e., electric long-haul trucks and coaches, with different drive cycles and operating conditions, which requires more durable catalyst and membrane compared with light duty vehicles (LDVs). Unfortunately, the degradation mechanism of the catalyst and membrane in membrane electrode assembly (MEA) of PEMFCs during long-period operation under the HDV condition is still not clearly understood. In this work, MEAs were made of our highly active catalysts, 30wt% Pt/KB, as the cathode and a commercial Pt/C catalyst as the anode. The MEAs were tested at different relative humilities under the HDV conditions with catalyst loading of 0.2 mgPt/cm2, back pressure of 250 kPa, under the standard protocol of accelerated stress test (AST) for 180k cycles, which is equivalent to 30,000 h. The results show that the MEA exhibit very high performance at beginning of life (BOL) with a current density of 1.6 A/cm2 at the cell voltage of 0.7 V, high mass activity of 384 mA·mgPt and large electrochemical active surface area (ECSA) of 86 m2·gPt at 50%RH. Under the same testing condition, the MEA still maintained the current density of 1.4 A/cm2, 1.2 A/cm2 and 1.0 A/cm2 and 0.9 A/cm2 at the cell voltage of 0.7 V after the AST of 30k, 60k, 90k and 120k cycles. Moreover, the performance of the MEA significantly decreased to 0.5 A/cm2 and 0.3 A/cm2 at the voltage of 0.7 V after the AST of 150k and 180k cycles. In comparison, the mass activity of the MEA first significantly dropped to 183 mA·mgPt after the AST of 30k cycles and maintains uniform decreasing from 60k cycles to 180 cycles, the similar phenomenon was observed in the degradation of ECSA. The H2 crossover and AC impendence spectra of the MEA was measured at different cell voltage during the AST process, in order to study the kinetic and mass transport loss during the degradation. Furthermore, the Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) was performed on the produced water of the MEA to monitor the degradation of Pt nanoparticles, carbon support, ionomer, and membrane. Besides, the Pt migrations, the pore structure and volume change in the carbon support before and after the AST of 180k cycles were studied using HR-TEM and mercury intrusion porosimetry (MIP). During the whole AST testing cycles, the MEA exhibited higher performance at relatively low humidity level, which is associated with the insufficient hydrophilicity of the carbon support and is more favorable for the PEMFCs working in low-humidity condition. In summary, this work presents the degradation behavior and mechanism for highly efficient and durable PGM-catalyst MEA under HDV conditions.

Experimental Study of Influence of Gasoline Fuel with MMT on Aging Performance of Three-Way Catalyst

An Experimental Study on the Effects of Gasoline with MMT on Aging Performance of Three-way Catalyst

Investigation of the Physicochemical Properties of Soot Subjected to Non-Catalytic and CeO2-catalytic Aging under Sequential Aerobic and Anaerobic Exhaust-Like Conditions Simulating the Transition from Engine Operation to Cessation

Influence of Different Thermal Aging Conditions on Soot Combustion with Catalyst by Thermogravimetric Analysis

Adaptability of M15 Methanol-Gasoline Blend to Catalysts

The Effect of Methane Addition on the Low-Temperature Oxidation Preparation and the Thermal Ignition Preparation of Dimethyl Ether under Representative Engine In-Cylinder Thermal Conditions

Multi-stage Rapid Aging Mode for Durability Evaluation of Automotive Catalysts

Impacts of MTBE in gasoline on the tailpipe ammonia emissions from China-6 certified passenger vehicles

Influence of methanol gasoline blend fuel on engine and catalyst performance

Thermal deactivation mechanism of the commercial Pt/Pd/Rh/CeO2-ZrO2/Al2O3 catalysts aged under different conditions for the aftertreatment of CNG-fueled vehicle exhaust

Engine Accelerated Aging Method Developed to Study the Effect of Lubricant Formulations on Catalyzed Gasoline Particulate Filter Durability

Effect of Different Aging Conditions on the Soot Oxidation by Thermogravimetric Analysis

Evolution hydrothermal aging resistance mechanism study of zirconium and manganese doped CeO 2 catalysts in soot catalytic combustion based on low Miller indices crystal surface effect

Methane Combustion with a Pd–Pt Catalyst Stabilized by Magnesia–Alumina Spinel in a High-Humidity Feed

Durability of Highly Active PGM Catalyst MEA Tested Via Nitrogen and Air AST Cycling under HDV Condition

The Impact of Fuel Compositions on the Particulate Emissions of Direct Injection Gasoline Engine

Effects of Zr Addition on the Performance of the Pd-Pt/Al 2 O 3 Catalyst for Lean-Burn Natural Gas Vehicle Exhaust Purification

Light‐Off Performance of Three‐Way Catalysts Before and After Accelerated Aging Test with Engine‐Dynamometer

Accelerated aging for after-treatment devices of diesel engine: Method, emission characteristics, and equivalence

Parametric study on effects of excess air/fuel ratio, spark timing, and methanol injection timing on combustion characteristics and performance of natural gas/methanol dual-fuel engine at low loads

Investigations in High-Efficiency PGM-Catalyst MEA and Its Long-Period Degradation Mechanism for PEMFC in Heavy-Duty Vehicles