Abstract:We report the high peak power picosecond hybrid fiber and solid-state laser amplifier system. The passively mode-locked solid-state seed source produced an average power of 1.8 W with pulse width of 14 ps and repetition rate of 86 MHz. It was directly coupled into the first Yb-doped polarized photonic crystal fiber amplifier stage. To avoid the nonlinear effects in fiber, the output power from the first stage was merely amplified to 24 W with the narrow spectra broadening of 0.21 nm. For the improvement of the peak power, the dual-end pumped composite Nd:YVO4 amplifier system has been chosen at the second stage. To reduce the serious thermal effect, the thermally bonded composite YVO4 – Nd:YVO4 – YVO4 rod crystal was used as the gain medium. The 53 W TEM00 mode with the peak power of 40 kW, beam quality of M2 < 1.15, corresponding to the optical-optical efficiency of 42.4% was obtained at the hybrid amplifier laser system. The system allows using a low power seed source and demonstrates an increase in the peak power beyond a fiber master oscillator power amplifier's (MOPA's) limit.

A 2.4 Mj All-Fiber-basedq-switched Fiber Master Oscillator Power Amplifier

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm

High-energy single-frequency pulsed fiber MOPA at 1064 nm based on a hybrid active-fiber

High pulse energy, narrow-linewidth all-fiber 1064 nm picosecond master oscillator power amplifier system

175-W Continuous-Wave Master Oscillator Power Amplifier Structure Ytterbium-Doped All-Fiber Laser

High-Powered Millijoule Pulse Energy Tm3+-Doped Fiber Amplifier at 2.05 Mu M

A 12 Mj 11 Ns Spectrally Narrow Fiber Amplifier with A Pulsed Pump

End-Pumped 300 W Continuous-Wave Ytterbium-Doped All-Fiber Laser With Master Oscillator Multi-Stage Power Amplifiers Configuration

1 Mj, 500 Khz Nd:YAG/Nd:YVO4 MOPA Laser with a Nd:YAG Cavity-Dumping Seed Laser

Pulsed Pumped Yb-doped Fiber Amplifier at Low Repetition Rate

Single-frequency pulsed laser source with hybrid MOPA configuration

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

High Peak Power Picosecond Hybrid Fiber and Solid-State Amplifier System

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

All-fiber 3.4-W 2.8-µm ultra-short pulse MOPA system seeded by the soliton self-frequency shift of 2-µm pulses

11-mJ pulse energy wideband Yb-doped fiber laser

High-power Multichannel PPMgLN-based Optical Parametric Oscillator Pumped by a Master Oscillation Power Amplification-Structured Q-switched Fiber Laser

High-power PPMgLN-based Optical Parametric Oscillator Pumped by a Linearly Polarized, Semi-Fiber-coupled Acousto-Optic Q-switched Fiber Master Oscillator Power Amplifier.