Abstract:A detailed micromechanical finite element analysis methodology is presented to predict the transverse tensile (fiber perpendicular) failure behavior of a unidirectional (UD) glass fiber-reinforced plastic composite ply. In order to understand the constituent-level stress–strain and damage behavior, finite element analysis is accomplished using representative volume element (RVE) that consists of random fiber distribution as observed in the microscopic image of an actual composite ply. For modeling the fiber/matrix interface failure behavior, cohesive zone module (cohesive surface/cohesive element) of Abaqus® is used. In order to capture the epoxy matrix stiffness and strength degradation, the following two different approaches are used: (i) initially, the linear Drucker–Prager plasticity model in combination with a ductile fracture criterion is used; (ii) later, a brittle failure approach such as the quadratic normal stress criterion within the framework of eXtended finite element method is used. From the detailed micromechanical analysis of the RVE, it is observed that the initial damage in the RVE occurs in the form of fiber/matrix interface decohesion. With increasing tensile load, interface crack propagates and creates a stress concentration region in the matrix material, adjacent to the crack tip. Further load application causes both interface crack tip and matrix stress concentration to move away from the load application direction. As soon as the interface crack tip reaches approximately 60° to 70° away from the load application direction, the conjunction of the matrix damage with the interface crack leads to the RVE final failure. The predicted average stress–strain curves from the above-mentioned two different epoxy matrix failure criterions (ductile and brittle) correlate very well with the experimental results, indicating that the brittle failure behavior of a UD fiber-reinforced plastic composite ply under transverse tensile load is mainly controlled by the fiber/matrix interface properties.

Elastic ply damage mechanics modeling of glass/epoxy laminated composite

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Continuum damage mechanics model of glass/epoxy composite laminate under in-plane shear loading

Finite Element Method of a Progressive Intralaminar and Interlaminar Damage Model for Woven Fibre Laminated Composites under Low Velocity Impact

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

A Coupled Elastic-Plastic Damage Model for the Mechanical Behavior of Three-Dimensional (3D) Braided Composites

Analysis of Cord-Rubber Composite Response Using the Nonlinear Continuum Damage Mechanics Approach

Development and experimental verification of an advanced 3D elastoplastic progressive damage model for composite materials

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

Predicting Damage Behaviors of Composite Laminates under Multiple Low‐velocity Impacts

A 3D objective material model for elastic-plastic damage behavior of fiber reinforced polymer composites

Comparison of two progressive damage models for predicting low-velocity impact behavior of woven composites

DAMAGE OF COMPOSITE UNDER LOW-VELOCITY IMPACT AND APPLICATION OF MECHANICAL EQUIVALENT MODEL

A Failure Mechanism Based Model for Numerical Modeling the Compression-after-impact of Foam-Core Sandwich Panels

Damage Modeling and Failure Analysis of Glass Fiber-Reinforced Composite Cylindrical Laminates Using Continuum Damage Mechanics

A Multi-Scale Modeling Scheme for Damage Analysis of Composite Structures Based on the High-Fidelity Generalized Method of Cells

A Microscopic Elasto-Plastic Damage Model for Characterizing Transverse Responses of Unidirectional Fiber-Reinforced Polymer Composites

Low Velocity Impact Response of Carbon Fiber Composite Laminates with Surface Glass Fibers

Computational micromechanical modeling of transverse tensile damage behavior in unidirectional glass fiber-reinforced plastic composite plies: Ductile versus brittle fracture mechanics approach

Experiments and Finite Element Simulations of Composite Laminates Following Low Velocity On-Edge Impact Damage

A Micromechanics-Based Damage Model for Compressive Behavior Analysis of Impacted Composite Laminates