Abstract:The failure of composite laminates under cyclic fatigue loads is complex, as multiple failure mechanisms are in play at different scales and interact with each other. Predicting the remaining fatigue life as well as the residual capacities of a composite laminate or component is crucial, particularly for safety-critical applications. A progressive fatigue model is proposed to describe the catastrophic failure of open-hole laminates under tensile cyclic fatigue. To represent both intra-laminar and inter-laminar damage, a combination of a continuum damage mechanics model (CDM) and a discrete cohesive zone model (CZM) is implemented in the finite element (FE) software Abaqus. The CDM combines fibre- and matrix-dominated S-N curves with the Palmgren–Miner accumulation rule and Hashin’s residual strength to form a fatigue failure criterion differentiating between fibre failure (FF) and matrix failure (MF). The CZM implemented in this work is the CF20 model proposed by NASA. Fatigue cycling is simulated using an external cycle-jump scheme, where the stiffness degradation is conducted between the FE simulations outside of the implicit solver [90/0] s. Glass fibre reinforced polymer (GFRP) open-hole specimens were tested in tensile cyclic fatigue at a load ratio of 0.1. The experiments were reproduced numerically and the results compared. After calibration of a set of parameters based on one load level, the model was able to reproduce the experimental S-N curve very well, predicting a slope of −0.10, while the experimental value was −0.11. The failure sequence of the laminate was also successfully reproduced. The growth of the split from the hole, and its interaction with inter-laminar delamination, was successfully captured. The proposed approach was able to describe the fatigue failure of an open-hole laminate with a minimal set of material inputs using a simplified fatigue damage model while avoiding convergence issues.

Damage Modeling and Failure Analysis of Glass Fiber-Reinforced Composite Cylindrical Laminates Using Continuum Damage Mechanics

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Progressive failure analysis of 2D woven composites at the meso-micro scale

Micro Failure Analysis of Fiber Metal Laminates

Micromechanics-based Progressive Failure Analysis of Carbon FIber/epoxy Composite Vessel under Combined Internal Pressure and Thermomechanical Loading

Analysis of Cord-Rubber Composite Response Using the Nonlinear Continuum Damage Mechanics Approach

Finite Element Analysis of Progressive Failure and Strain Localization of Carbon Fiber/Epoxy Composite Laminates by ABAQUS

Continuum damage mechanics based failure prediction and damage assessment in laminated composite structures

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Numerical Simulation of Low Velocity Impact Failure of CCF300 Carbon Fiber Laminate Based on ABAQUS

Failure Analysis of Carbon Fiber/epoxy Composite Cylindrical Laminates Using Explicit Finite Element Method

Development and experimental verification of an advanced 3D elastoplastic progressive damage model for composite materials

Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates

An Enhanced Progressive Damage Model for Laminated Fiber-Reinforced Composites Using the 3D Hashin Failure Criterion: A Multi-Level Analysis and Validation

A continuum damage mechanics model for fatigue degradation and failure of short fiber reinforced composites

An efficient micromechanics-based finite element model for failure analysis of laminated composites

Progressive Damage and Failure Modeling in Fiber-Reinforced Laminated Composites Containing a Hole

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics