Abstract:A detailed micromechanical finite element analysis methodology is presented to predict the transverse tensile (fiber perpendicular) failure behavior of a unidirectional (UD) glass fiber-reinforced plastic composite ply. In order to understand the constituent-level stress–strain and damage behavior, finite element analysis is accomplished using representative volume element (RVE) that consists of random fiber distribution as observed in the microscopic image of an actual composite ply. For modeling the fiber/matrix interface failure behavior, cohesive zone module (cohesive surface/cohesive element) of Abaqus® is used. In order to capture the epoxy matrix stiffness and strength degradation, the following two different approaches are used: (i) initially, the linear Drucker–Prager plasticity model in combination with a ductile fracture criterion is used; (ii) later, a brittle failure approach such as the quadratic normal stress criterion within the framework of eXtended finite element method is used. From the detailed micromechanical analysis of the RVE, it is observed that the initial damage in the RVE occurs in the form of fiber/matrix interface decohesion. With increasing tensile load, interface crack propagates and creates a stress concentration region in the matrix material, adjacent to the crack tip. Further load application causes both interface crack tip and matrix stress concentration to move away from the load application direction. As soon as the interface crack tip reaches approximately 60° to 70° away from the load application direction, the conjunction of the matrix damage with the interface crack leads to the RVE final failure. The predicted average stress–strain curves from the above-mentioned two different epoxy matrix failure criterions (ductile and brittle) correlate very well with the experimental results, indicating that the brittle failure behavior of a UD fiber-reinforced plastic composite ply under transverse tensile load is mainly controlled by the fiber/matrix interface properties.

Continuum damage mechanics model of glass/epoxy composite laminate under in-plane shear loading

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Elastic ply damage mechanics modeling of glass/epoxy laminated composite

Finite Element Method of a Progressive Intralaminar and Interlaminar Damage Model for Woven Fibre Laminated Composites under Low Velocity Impact

Comparison of two progressive damage models for predicting low-velocity impact behavior of woven composites

Damage Modeling and Failure Analysis of Glass Fiber-Reinforced Composite Cylindrical Laminates Using Continuum Damage Mechanics

Analysis of Cord-Rubber Composite Response Using the Nonlinear Continuum Damage Mechanics Approach

A constitutive model for the mechanical behavior of a 3D C/C composite

Continuum damage mechanics based failure prediction and damage assessment in laminated composite structures

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

A Continuum Damage and Discrete Crack Module for Fatigue Damage Prediction of Laminated Composite Structures

Progressive Fatigue Modelling of Open-Hole Glass-Fibre Epoxy Laminates

A Novel Integrated Modeling Strategy for Predicting Damage Mechanisms and Energy Dissipation of Composite Stiffened Structures under Low-Velocity Impact and Compression

Predicting Damage Behaviors of Composite Laminates under Multiple Low‐velocity Impacts

Experimental and numerical studies on low-velocity impact of laminated C/SiC structures

Computational micromechanical modeling of transverse tensile damage behavior in unidirectional glass fiber-reinforced plastic composite plies: Ductile versus brittle fracture mechanics approach

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Computational Micromechanics-Based Prediction of the Failure of Unidirectional Composite Lamina Subjected to Transverse and In-Plane Shear Stress States

A general continuum damage model for soft composites

A Continuum Damage Model for Three-Dimensional Woven Composites and Finite Element Implementation

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading