Abstract:Corrosion of reinforcement has a significant effect on the deformation of reinforced concrete beams by deteriorating the bond-slip characteristics, diminishing the cross-sectional area of reinforcement, and causing cracking. The traditional way of quantifying the load capacity and simulating deflection is the moment-curvature (M/χ) approach. The problem is that the M/χ approach is semi-empirical after cracking as it is strain-based and cannot allow for tension stiffening. This paper introduces the new displacement-based moment-rotation (M/θ) approach which directly simulates the development of cracks and hence allows for tension stiffening. This M/θ approach is then used to predict the load-deflection behavior of reinforced concrete beams with corrosion effect by incorporating the corrosion-affected bond-slip model. The bond-slip model only considers the corrosion effect but ignores the confinement effect. It is used here as an example to describe the procedure of how to quantify the corrosion effect on reinforced concrete beam behavior. The load-deflection curves obtained from the numerical simulation show a good agreement with test results. For reinforced concrete beams with confinement, the only difference is to replace the bond-slip model with the one which includes both corrosion and stirrup effects. Additionally, the paper shows how to use the M/θ approach with the bond-slip model to predict the real corrosion level of reinforcement in some tests in which only the theoretical corrosion levels are provided.

Prediction of Flexural Deformation of A Corroded Rc Beam with A Polynomial Tension-Stiffening Model

Prediction of Flexural Deformation of Reinforcement Concrete Beams with Polynomial Tension Stiffening Model

Probability-Based Performance Degradation Model and Constitutive Model for the Buckling Behavior of Corroded Steel Bars

FLEXURAL CAPACITY OF CORROSION-DAMAGED RC BEAMS

Evaluation of Main Code Models for Predicting Flexural Load-Bearing Capacity Against Intermediate Crack-Induced Debonding in Frp-Strengthened Rc Beams

Deflection and Crack Calculation of Corroded Reinforced Concrete Beams

Assesment of Main Models for Predicting Debonding Load-Bearing Capacity Against Intermediate Crack-Induced Debonding Failure in Frp-Strengthened Rc Beams

Analytical Model for the Bond Stress-Slip Relationship of Deformed Bars in Normal Strength Concrete

Modeling the Flexural Carrying Capacity of Corroded RC Beam

A New Flexural Strength Model of CFRP-strengthened RC Beams with Intermediate Crack Induced Debonding Failure

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

Numerical Analysis for Crack Width of Reinforced Concrete Beam with Bond-Slip Effect

Predicting the Flexural Capacity of Rc Beam with Partially Unbonded Steel Reinforcement

CRACK MODEL OF REINFORCED CONCRETE BASED ON STRAIN DECOMPOSITION METHOD

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Predicting deflection of retrofitted reinforced concrete beams

Flexural behavior of Corrosion-Damaged prestressed concrete beams

Corrosion-crack path based probabilistic model to predict the durability behavior of RC components

Analytical Model to Predict Residual Flexural Capacity of Recycled Aggregate Concrete Beams with Corroded Longitudinal Rebars

Cohesive element-based high-fidelity modeling of steel bond-slip behavior for corroded reinforced concrete beams

Numerical Simulation of Partial-Interaction Load-Deflection Behavior of Corroded Reinforced Concrete Beams Based on a Segmental Approach and Evaluation of Reinforcement Corrosion Level