Abstract:On-line particle sizing through acoustic emission (AE) sensing is promising in many industrial applications. However, very limited research on the fundamental sensing mechanism of this technique is available. One imminent issue is the propagation of impact-induced AE signals along a waveguide, which plays a significant role in interpreting the resulting acoustic waveforms and optimizing the design of the waveguide. In this paper, a broadband point-contact sensor, which has an extremely flat frequency response, is used to acquire faithful AE signals. Experimental investigations into the wave propagation behaviour are presented and the influences of different parameters, including particle size, impact velocity, material type and impact location, on the detected AE signals are also discussed. Two fundamental waves with different characteristics are observed in the acoustic waveforms. Experimental results obtained demonstrate that both the particle size and material type greatly affect the amplitude rather than the signal pattern of the acoustic waveform. Meanwhile, significant changes in the signal amplitude and pattern occur with different impact velocities and impact locations. (c) 2021 Elsevier B.V. All rights reserved. On-line particle sizing through acoustic emission (AE) sensing is promising in many industrial applications. However, very limited research on the fundamental sensing mechanism of this technique is available. One imminent issue is the propagation of impact-induced AE signals along a waveguide, which plays a significant role in interpreting the resulting acoustic waveforms and optimizing the design of the waveguide. In this paper, a broadband point-contact sensor, which has an extremely flat frequency response, is used to acquire faithful AE signals. Experimental investigations into the wave propagation behaviour are presented and the influences of different parameters, including particle size, impact velocity, material type and impact location, on the detected AE signals are also discussed. Two fundamental waves with different characteristics are observed in the acoustic waveforms. Experimental results obtained demonstrate that both the particle size and material type greatly affect the amplitude rather than the signal pattern of the acoustic waveform. Meanwhile, significant changes in the signal amplitude and pattern occur with different impact velocities and impact locations.

Factors affecting characteristics of acoustic signals in particle impact noise detection for aerospace devices

Research and Application of a Novel Sensitivity Measurement Method for Particle Impact Noise Detection Sensors

Discussion of Test Standard for Particle Impact Noise Detection

Research on Particle Impact Noise Detection Standard

Impact Test Condition of Particle Impact Noise Detection for Space Relay Remainders

Dynamics Analysis of Vibration Process in Particle Impact Noise Detection

Research on Metal-Particle Sizing in Particle Impact Noise Detection System

Research on Particle Impact Noise Auto Detecting System for Sealed Electronic Components

Algorithm Used to Detect Weak Signals Covered by Noise in PIND

Study on Measurement of Impact Point Coordinates with the Combination of Acoustic Array and Optical Detection

The Influence of Concentration and Size on the Error of Particulate Matter Detection Using Charge Induction Method

Research on Non-sinusoidal Vibration Excitation in Particle Impact Noise Detection

Experimental Investigations into the Propagation of Acoustic Emission Signals from Particle Impacts along a Waveguide

Aeroelastic Effect on Aerothermoacoustic Response of Metallic Panels in Supersonic Flow

Applications of Statistical Energy Analysis in Influencing Factors Analysis of Aircraft Vibro-acoustic Response Characteristics

Recognition Method of Impactor on Spacecraft Cabin Based on Acoustic Emission

Feature Extraction of Remnant Material Based on Aerospace Relay Particle Impact Noise Detection Experiment Signal

Study of PIND Vibration Detection Conditions for Remainders in Space Relay Based on Curve Fitting Theory

Analysis of Structural Parameters of Nonresonant Photoacoustic Gas Sensor

Aircraft Structure’s Response Prediction Analysis and Experimental Study in High-strength Broadband Noise Environments

Investigations Into The Sensing Mechanism Of Acoustic Emission Sensors For Particle Size Measurement In A Particular Case: Normal Incidence