Abstract:As a major gas pollution source, nitrogen oxide (NO x , NO + NO 2 ) poses a serious threat to the natural environment and human health. Therefore, it is imperative to develop high-efficiency detection equipment for in-situ detection of NO x . The emission sources of NO x are mainly industrial exhaust gas and automobile exhaust gas. The gas temperature is relatively high and the composition is relatively complicated. The solid electrolyte-based gas sensor can realize high selectivity and high sensitivity detection of NO x at high temperature. In this study, a Co3O4/Cr2O3/YSZ composite material was used as the sensing electrode (SE) and YSZ was used as the solid electrolyte to prepare the impedance type of NO x sensor. The sensor was characterized by XRD, SEM and EDX, and the NO x sensing performance at high temperature was systematically studied. The results show that the Co3O4/Cr2O3/YSZ sensing electrode with particle size of about 200 nm has a high specific surface area due to the loose and porous structure, which is conducive to gas diffusion and mass transfer. The sensor shows a good response-recovery characteristic to NO x , and the concentration has little influence on the sensor. In addition, the sensor shows good reproducibility, stability, and selectivity. In order to further apply the sensor to in-situ detection of NO x under high temperature, we successfully prepared a novel self heated sensor. The sensor shows good sensitivity characteristics, and the concentration detection range is - . In addition, the self-heating sensor shows good reproducibility. This research will- provide new ideas for in-situ detection of NO x gas at high temperature.

Highly Sensitive Mixed-Potential-type NO2 Sensor Using Porous Double-Layer YSZ Substrate

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

High Performance Mixed Potential Type NO2 Gas Sensor Based on Porous YSZ Layer Formed with Graphite Doping.

Improving response performance of impedimetric NO 2 sensor using NiO-YSZ mixed conductor porous layer

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

Mixed potential electrochemical NO2 sensor with YSZ ceramic electrolyte for monitoring in online vehicle diagnosis system

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Sensitivity and selectivity enhancement of the YSZ-based mixed-potential ammonia sensors with flame-spray-made double-sensing electrodes

Research on Preparation and Performance of a New Solid Electrolyte Based Nitrogen Oxides Sensor

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film

Enhanced P-Type NO2-sensing Properties of ZnO Nanowires Utilizing CNTs Electrode

YSZ-Based Mixed Potential Type Sensors Utilizing Pd-doped SrFeO 3 Perovskite Sensing Electrode to Monitor Sulfur Dioxide Emission

Flexible Resistive Gas Sensor Based on Molybdenum Disulfide-Modified Polypyrrole for Trace NO2 Detection

Highly responsive gas sensors based on grain boundary–rich polycrystalline few-layer MoS2 films for NO2 detection

Conductometric NO2 Gas Sensors Based on MOF-derived Porous ZnO Nanoparticles

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2

Enhanced NO2 sensing performance of ZnO@ZnS core-shell structure fabricated using a solution chemical method