Abstract:One of the main challenges for multi-wheel hub motor driven vehicles is the coordination of individual drivetrains to improve mobility and stability in the steering process. This paper proposes a dual-steering mode based on direct yaw moment control for enhancing vehicle steering ability in complex environments. The control system is designed as a hierarchical structure, with a yaw moment decision layer and a driving force distribution layer. In the higher-level layer, the objective optimization function is constructed to obtain the slip steering ratio, which represents the degree of vehicle slip steering in the dual-steering mode. A yaw moment controller using active disturbance rejection control theory is designed for continuous yaw rate control. When the actual yaw rate of the vehicle deviates from the reference yaw rate obtained by the vehicle reference model and the slip steering ratio, the yaw moment controller is actuated to determine the yaw moment demand for vehicle steering. In the lower-level layer, there is a torque distribution controller based on distribution rules, which meets the requirement of yaw moment demand without affecting the total longitudinal driving force of the vehicle. For verifying the validity and feasibility of the dual-steering mode, simulations were conducted on the hardware-in-loop real-time simulation platform. Additionally, corresponding real vehicle tests were carried out on an eight-wheel prototype vehicle. Test results were generally consistent with the simulation results, thereby demonstrating that the proposed dual-steering mode reduces steering radius and enhances the steering performance of the vehicle.

Research on Force Sensing for Digital Steering Wheel of Powered Modular Vehicles

Research on Force Characteristics of Steering-wheel System in Tracked Vehicle Simulator

Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Energy Feedback Regulation of Automotive Driving Simulator Steering Wheel

Design and Robust Control of a Precise Torque Controllable Steering Module for Steer-by-Wire Systems

Personalized Steering Feel Design for Steer-by-Wire Systems Based on the Rack Force Estimation

Methods for modeling the steering wheel torque of a steer-by-wire vehicle

Design and Algorithm Research of Angle Sensor for Vehicle Steering Wheel

A Steering Wheel System and Controller for the Driving Simulator

An electronically controlled hydraulic power steering system for heavy vehicles

High authenticity steering feel control strategy for Steer-by-Wire system based on terminal sliding mode rack force observer

Steer-by-Wire Force Feedback System Based on Magnetorheological Fluid Damper

Modeling, simulation, and experimental validation of electro-hydraulic power steering system in multi-axle vehicles

Dual-steering mode based on direct yaw moment control for multi-wheel hub motor driven vehicles: Theoretical design and experimental assessment

A model predictive control approach for angle tracking of steer‐by‐wire system with nonlinear transmission ratio

Road Sense Construction for Steer-by-Wire System: Data-Driven Feedback Torque Design and Friction Compensated Explicit Model Predictive Control

Experimental identification of a linear parametric driver steering control model with torque feedback

Model Predictive Control of Steering Torque in Shared Driving of Autonomous Vehicles.

Communication and Interaction With Semiautonomous Ground Vehicles by Force Control Steering

Hardware-in-loop Simulation Test Platform of Electric Power Steering System Using Two Servo Motors

A Research on the Electric Steering System of All-wheel Independent Electric Drive Vehicle