Multidimensional phenotyping of breast cancer cell lines to guide preclinical research

J. Saunus,C. Smart,Jamie R. Kutasovic,R. Johnston,Priyakshi Kalita-de Croft,Mariska S. Miranda,E. Rozali,A. Vargas,L. Reid,Eva Lorsy,S. Cocciardi,Tatjana Seidens,A. M. McCart Reed,A. Dalley,L. Wockner

DOI: https://doi.org/10.1007/s10549-017-4496-x

Breast Cancer Research and Treatment

Abstract:

What problem does this paper attempt to address?

Research on Force Characteristics of Steering-wheel System in Tracked Vehicle Simulator

Chun-yu WEI,Yan-ding WEI,Xiao-jun ZHOU,Ming-xiang XIE

2012-01-01

Abstract:A force characteristics function applied in the steering feel simulation system of a tracked vehicle simulator was built. This function is related with the vehicle dynamic parameters and state parameters. A conception of "generalized ground drag index" was presented as well as a method of constructing it with the vehicle state parameters provided. Virtual drive of the tracked vehicle was conducted in Vortex in order to simulate and analyze the changing relations between different parameters and force characteristics function and compute the steering torque in real time on different road situations. The results reflect that the steering-wheel force characteristics function can meet requests very well.
Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Qiang Li,Xiao-li Yu,Hua Zhang,Rui Huang

DOI: https://doi.org/10.1155/2015/910230

IF: 1.43

2015-01-01

Mathematical Problems in Engineering

Abstract:The purpose of this paper is to present a novel controller of differential assist steering system. Firstly, the integrated controller module in electric vehicle is investigated, in which the front axle is refitted for two in-wheel motors. Secondly, genetic algorithm is used to optimize the control decision-making rules of fuzzy controller. Thereafter, the built model is embedded in veDYNA development environment with an offline simulation test of driver/vehicle/road closed-loop system. At last, control strategy, which has been compiled and downloaded to Mirco AutoBox controller prototype, is used for the real vehicle experimental analysis and validation of the proposed controller. Both simulation and experimental results demonstrate that the controller can improve the yaw motion and reduce the slip angle of vehicle. Here, the vehicle is equipped with the in-wheel motors on both sides. At the same time, the controller cannot only track the steering torque indication of driving current, but also preferably maintain the steering assist handle. Furthermore, it can bring about a good road feeling to the driver because of the reduced torque fluctuation.
Design of steering wheel torque with human-machine interaction for uncoupled shared steering

Chaoning Chen,Hongyu Zheng,Changfu Zong,Chuyo Kaku

DOI: https://doi.org/10.1177/09544070241246578

2024-04-23

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. In the uncoupled shared steering architecture based on the steering-by-wire (SBW) system, direct access to road feel and automation-related information is unavailable to the driver. To address this problem, this paper proposes a steering wheel torque feedback model that considers human-machine interaction information. First, the model predictive control (MPC) is adopted in lateral vehicle control by automation. Then a fuzzy control-based control authority allocation model is applied to assign the control authority weight between the human driver and automation according to the value of the Path Lateral Hazard (PLH) Factor and the Driver's Intent Evaluation (DIE) Factor. These two factors reflect the probability of lateral vehicle collision and the intensity of the driver's driving intention, respectively. Next, the road feel feedback torque and the human-machine interface (HMI) feedback torque is incorporated in the steering wheel feedback torque model to enhance the driver's experience in SBW vehicles and trust in the automation. The HMI feedback torque is designed to provide human drivers with information on control authority weight variation and desired angle deviation between the human driver and automation. Simulation and experiment results suggest that the proposed uncouple shared control method can accelerate driver acceptance of automation and provide the driver with a more intuitive steering experience.

engineering, mechanical,transportation science & technology
Auxiliary Steering Control of Vehicle Driving with Force/Haptic Guidance

Xiaobo Shi,Dingxuan Zhao,Yuhang Zhong,Jinming Chang,Tao Ni,Xiangxian Chen

DOI: https://doi.org/10.3390/su151612366

IF: 3.9

2023-08-15

Sustainability

Abstract:The rapid development of the automobile industry has resulted in the development of many vehicles, increased traffic, and frequent accidents. The complexity of road conditions is a major contributor to the occurrence of traffic accidents. Drivers are distracted and hence unable to fully observe all road information and make optimal and timely driving decisions. This study proposes an auxiliary steering control system with force/tactile guidance (ASCFT) and its corresponding control strategy to address this problem. We combined vehicle autonomous path planning based on road condition information and the human–machine sharing control strategy, which integrated the manipulative force of the driver and a virtual guidance force on the steering wheel. Consequently, the ASCFT eliminated the mechanical connection between the steering wheel and the steering wheels in favor of a force/tactile-assisted steering structure, providing the driver with a sense of steering force based on road information. Additionally, we proposed a smooth vehicle trajectory optimization method based on the improved RRT algorithm and a path-following controller based on the forecast information to achieve auxiliary safety driving. The ASCFT's performance was confirmed through constructing a fixed-base simulator experimental platform with the ASCFT. The results revealed that at the vehicle speed of 60 km/h and a handwheel rotation of 60°, the steering wheel was instantly released and turned back in about 3.5 s. Furthermore, predictive haptic feedback warned the driver of an upcoming obstacle.

environmental sciences,environmental studies,green & sustainable science & technology
Adaptive Driver-Automation Shared Steering Control via Forearm Surface Electromyography Measurement

Zheng Wang,Satoshi Suga,Edric John Cruz Nacpil,Zhanhong Yan,Kimihiko Nakano

DOI: https://doi.org/10.1109/jsen.2020.3035169

IF: 4.3

2021-02-15

IEEE Sensors Journal

Abstract:Shared steering control has been developed to reduce driver workload while keeping the driver in the control loop. A driver could integrate visual sensory information from the road ahead and haptic sensory information from the steering wheel to achieve better driving performance. Previous studies suggest that, compared with adaptive automation authority, fixed automation authority is not always appropriate with respect to human factors. This paper focuses on designing an adaptive shared steering control system via sEMG (surface electromyography) measurement from the forearm of the driver, and evaluates the effect of the system on driver behavior during a double lane change task. The shared steering control was achieved through a haptic guidance system which provided active assistance torque on the steering wheel. Ten subjects participated in a high-fidelity driving simulator experiment. Two types of adaptive algorithms were investigated: haptic guidance decreases when driver grip strength increases (HG-Decrease), and haptic guidance increases when driver grip strength increases (HG-Increase). These two algorithms were compared to manual driving and two levels of fixed authority haptic guidance, for a total of five experimental conditions. Evaluation of the driving systems was based on two sets of dependent variables: objective measures of driver behavior and subjective measures of driver workload. The results indicate that the adaptive authority of HG-Decrease yielded lower driver workload and reduced the lane departure risk compared to manual driving and fixed authority haptic guidance.
Indirect Shared Control for Cooperative Driving Between Driver and Automation in Steer-by-Wire Vehicles

Renjie Li,Yanan Li,Shengbo Eben Li,Chaofei Zhang,Etienne Burdet,Bo Cheng

DOI: https://doi.org/10.1109/tits.2020.3010620

IF: 8.5

2020-01-01

IEEE Transactions on Intelligent Transportation Systems

Abstract:It is widely acknowledged that drivers should remain in the control loop before automated vehicles completely meet real-world operational conditions. This paper presents an "indirect shared control" framework for steer-by-wire vehicles, which allows the control authority to be continuously shared between the driver and automation through an weighted-input-summation method. A "best-response" driver steering model based on model predictive control (MPC) for indirect shared control is proposed. Unlike any conventional driver model for manual driving, this model assumes that drivers can learn and incorporate the controller strategy into their internal model for predictive path following. The analytic solution to the driver model is provided to enable off-line simulations. A driving-simulator experiment was conducted to demonstrate the advantages of the indirect shared control system in a highway lane-keeping task. The result showed that the proposed indirect shared control method was effective to improve the subjects' lane-keeping performance and reduce steering control effort. The proposed driver steering model was also validated by the experiment data, which produced a smaller prediction error than the conventional MPC driver model.
Analysis of Human-Machine Cooperation When Driving with Different Degrees of Haptic Shared Control

Franck Mars,Mathieu Deroo,Jean-Michel Hoc

DOI: https://doi.org/10.1109/toh.2013.2295095

IF: 3.105

2014-07-01

IEEE Transactions on Haptics

Abstract:This study investigated human-machine cooperation when driving with different degrees of a shared control system. By means of a direct intervention on the steering wheel, shared control systems partially correct the vehicle's trajectory and, at the same time, provide continuous haptic guidance to the driver. A crucial point is to determine the optimal level of steering assistance for effective cooperation between the two agents. Five system settings were compared with a condition in which no assistance was present. In addition, road visibility was manipulated by means of additional fog or self-controlled visual occlusions. Several performance indicators and subjective assessments were analyzed. The results show that the best repartition of control in terms of cooperation between human and machine can be identified through an analysis of the steering wheel reversal rate, the steering effort and the mean lateral position of the vehicle. The best cooperation was achieved with systems of relatively low-level haptic authority, although more intervention may be preferable in poor visibility conditions. Increasing haptic authority did not yield higher benefits in terms of steering behavior, visual demand or subjective feeling.

computer science, cybernetics
Road Sense Construction for Steer-by-Wire System: Data-Driven Feedback Torque Design and Friction Compensated Explicit Model Predictive Control

Yicai Liu,Guowang Zhang,Qi Yuan,Zhentao Chen,Xiangyu Wang,Liang Li

DOI: https://doi.org/10.1109/tte.2024.3354805

IF: 6.519

2024-01-01

IEEE Transactions on Transportation Electrification

Abstract:As the preferred configuration for autonomous vehicles, the steer-by-wire (SbW) system replaces the mechanical linkage with electric signals. However, the disconnection of the steering column deteriorates the origin steering feedback torque (SFT), necessitating the road sense construction. To provide the potential driver convincing steering feel, this paper proposes a road sense construction scheme, including an SFT designer employing the data-driven method and an SFT controller based on the friction compensated explicit model predictive control (FEMPC). Initially, the hand wheel module and road wheel module are introduced to analyze network features and establish controller foundations. Subsequently, the torque designer combining convolution neural network (CNN) and gated recurrent unit (GRU) layers is proposed, which can extract the spatial and temporal information of vehicle dynamic (VD) states respectively. To ensure precision and real-time performance, the torque controller based on the explicit model predictive control (EMPC) is then presented and the Brown friction model is also adopted for feedforward compensation. After training the designer with real vehicle data, the whole road sense construction scheme is verified subjectively and objectively. The simulation and experiment results show the authenticity of the designer on the one hand and the precision of the controller on the other.

engineering, electrical & electronic,transportation science & technology
Shared and traded control for human-automation interaction: a haptic steering controller and a visual interface

Mauricio Marcano,Andrea Castellano,Sergio Díaz,Joshué Pérez,Fabio Tango,Elisa Landini,Paolo Burgio

DOI: https://doi.org/10.1007/s42454-021-00030-6

2021-02-09

Abstract:Automated and highly automated vehicles still need to interact with the driver at different cognitive levels. Those who are SAE level 1 or 2 consider the human in the loop all the time and require strong participation of the driver at the control level. Yet, to increase safety, trust, and driver comfort with this mode of automation, systems with a strong cooperative component are needed. In this sense, this paper introduces the design of a vehicle controller based on shared control, together with an arbitration system, and the design of a visual human-machine interface (HMI) to foster the mutual understanding between driver and automation while sharing driving task. The driver-automation cooperation is achieved through incremental support, in a continuum spectrum from manual to full automation. Additionally, the design of an HMI to support the driver in a takeover maneuver is presented, considering that this functionality is a key component of vehicle SAE levels 3 and 4. The work presented in this paper represents the latest advances in the integration being carried out within the framework of the PRYSTINE project.

English Else
Sharing control with haptics: seamless driver support from manual to automatic control

Mark Mulder,David A Abbink,Erwin R Boer

DOI: https://doi.org/10.1177/0018720812443984

Abstract:Objective: Haptic shared control was investigated as a human-machine interface that can intuitively share control between drivers and an automatic controller for curve negotiation. Background: As long as automation systems are not fully reliable, a role remains for the driver to be vigilant to the system and the environment to catch any automation errors. The conventional binary switches between supervisory and manual control has many known issues, and haptic shared control is a promising alternative. Method: A total of 42 respondents of varying age and driving experience participated in a driving experiment in a fixed-base simulator, in which curve negotiation behavior during shared control was compared to during manual control, as well as to three haptic tunings of an automatic controller without driver intervention. Results: Under the experimental conditions studied, the main beneficial effect of haptic shared control compared to manual control was that less control activity (16% in steering wheel reversal rate, 15% in standard deviation of steering wheel angle) was needed for realizing an improved safety performance (e.g., 11% in peak lateral error). Full automation removed the need for any human control activity and improved safety performance (e.g., 35% in peak lateral error) but put the human in a supervisory position. Conclusion: Haptic shared control kept the driver in the loop, with enhanced performance at reduced control activity, mitigating the known issues that plague full automation. Application: Haptic support for vehicular control ultimately seeks to intuitively combine human intelligence and creativity with the benefits of automation systems.
Human–Machine Collaboration for Automated Driving Using an Intelligent Two‐Phase Haptic Interface

Chen Lv,Yutong Li,Yang Xing,Chao Huang,Dongpu Cao,Yifan Zhao,Yahui Liu

DOI: https://doi.org/10.1002/aisy.202000229

IF: 7.298

2021-02-12

Advanced Intelligent Systems

Abstract:Prior to realizing fully autonomous driving, human intervention is periodically required to guarantee vehicle safety. This poses a new challenge in human–machine interaction, particularly during the control authority transition from automated functionality to a human driver. Herein, this challenge is addressed by proposing an intelligent haptic interface based on a newly developed two‐phase human–machine interaction model. The intelligent haptic torque is applied to the steering wheel and switches its functionality between predictive guidance and haptic assistance according to the varying state and control ability of human drivers. This helps drivers gradually resume manual control during takeover. The developed approach is validated by conducting vehicle experiments with 26 participants. The results suggest that the proposed method effectively enhances the driving state recovery and control performance of human drivers during takeover compared with an existing approach. Thus, this new method further improves the safety and smoothness of human–machine interaction in automated vehicles. Herein, the automation‐to‐human handover control problem of automated vehicles is addressed by using an intelligent haptic interface. The intelligent haptic torque is applied to the steering wheel and switches its functionality between predictive guidance and haptic assistance according to the varying state and control ability of human drivers. This helps drivers gradually resume manual control during takeover.

English Else
A Shared Steering Controller Design Based on Steer-by-wire System Considering Human-Machine Goal Consistency.

Biao Ma,Yulong Liu,Xiaoxiang Na,Yahui Liu,Yiyong Yang

DOI: https://doi.org/10.1016/j.jfranklin.2018.12.028

IF: 4.246

2019-01-01

Journal of the Franklin Institute

Abstract:Shared control structure is beneficial to steering controller design of intelligence vehicles, and human-machine goal consistency is a key prerequisite for shared control. However, the goal consistency is usually given and cannot be changed, and the steering controller in low goal consistency, which directly affect the vehicle performance in case of emergency, has not been sufficiently investigated. This paper proposes a shared steering controller for path-following task based on Nash game strategy and steer-by-wire system considering different human-machine goal consistency. The driver-automation interactive path-following task is modeled by non-cooperative MPC, and authority weight of lateral displacement is used to balance the control objectives of the driver and automation. Human-machine goal consistency is determined by the driver and the automation controller steering angle. Aimed at different goal consistencies, a continuous authority weight adjustment algorithm is designed to ensure correct path following. This is especially true in low consistency in this study, when four driving modes are given to meet the different demand for control power. Simulations and hard-in-loop tests are conducted to verify the proposed control algorithm and the results show that it can perform the path-following task irrespective of human-machine goal consistency.
A Fuzzy Logic Shared Steering Control Approach For Semi-Autonomous Vehicle

Ali Hamdan,Reine Talj,Veronique Cherfaoui

DOI: https://doi.org/10.1109/icar53236.2021.9659434

2021-12-06

Abstract:This paper deals with the shared lateral control between the driver and the automated system for the lane keeping purpose. The objective of this shared control is to ensure road safety and enhance driving performance. The control authority is realized using the blended shared control that permits the fusion of two inputs via a fusion parameter. To do that, a driver model is detailed to represent the human in the loop. The vehicle longitudinal and lateral movement are performed by an autonomous system based on Super Twisting Sliding Mode (STSM) control approach. A Fuzzy Logic Controller followed by a situation-based analysis block for the decision-making process are developed for the fusion parameter determination. Finally, the proposed shared control is validated on Matlab/Simulink for two case studies with a complete nonlinear model of the vehicle validated on “SCANeR Studio” (OKtal) professional simulator.
Toward Consumer Acceptance of Cooperative Driving Systems: A Human-Centered Shared Steering Control Approach Within a Hierarchical Framework.

Wenfeng Guo,Zhongxin Teng,Xiaolin Song,Dongpu Cao,Haotian Cao,Weiwei Zhang,Zhi Huang,Jun Li

DOI: https://doi.org/10.1109/tce.2024.3357985

2024-01-01

IEEE Transactions on Consumer Electronics

Abstract:As driver-automation cooperative driving systems become increasingly integrated into modern vehicles as consumer technologies and electronics, how to ensure consumer acceptance of these systems is a noteworthy consideration. This paper proposes a human-centered shared steering control method for cooperative driving systems, aimed at reducing driver-automation steering conflicts and enhancing driver acceptance by integrating human factors into each module of a hierarchical shared steering control framework. Specifically, the target path of the automated system is generated by a novel cooperative path planning algorithm based on driver intention recognition, artificial potential fields, and polynomial curve. Then, the path-following controller is developed based on model predictive control and an integrated driver-vehicle dynamic model. Next, a numerical function model is established to determine the driver’s control authority in real time with consideration of driving risk and intervention degree. Finally, several driver-in-the-loop experiments are conducted to verify the effectiveness and superiority of proposed shared steering control approach. The subjective and objective evaluation results demonstrate that the proposed approach can minimize the degree of intervention in driver behavior while ensuring driving safety, thereby enhancing driver acceptance.
Human-Machine Collaboration for Automated Vehicles via an Intelligent Two-Phase Haptic Interface

Chen Lv,Yutong Li,Yang Xing,Chao Huang,Dongpu Cao,Yifan Zhao,Yahui Liu

DOI: https://doi.org/10.48550/arXiv.2002.03597

2020-02-10

Systems and Control

Abstract:Prior to realizing fully autonomous driving, human intervention will be required periodically to guarantee vehicle safety. This fact poses a new challenge in human-machine interaction, particularly during control authority transition from the automated functionality to a human driver. This paper addresses this challenge by proposing an intelligent haptic interface based on a newly developed two-phase human-machine interaction model. The intelligent haptic torque is applied on the steering wheel and switches its functionality between predictive guidance and haptic assistance according to the varying state and control ability of human drivers, helping drivers gradually resume manual control during takeover. The developed approach is validated by conducting vehicle experiments with 26 human participants. The results suggest that the proposed method can effectively enhance the driving state recovery and control performance of human drivers during takeover compared with an existing approach, further improving the safety and smoothness of the human-machine interaction in automated vehicles.
An Admittance Control Method Based on Parameters Fuzzification for Humanoid Steering Wheel Manipulation

Tuochang Wu,Junkai Ren,Chuang Cheng,Xun Liu,Hui Peng,Huimin Lu

DOI: https://doi.org/10.3390/biomimetics8060495

2023-10-19

Abstract:Developing a human bionic manipulator to achieve certain humanoid behavioral skills is a rising problem. Enabling robots to operate the steering wheel to drive the vehicle is a challenging task. To address the problem, this work designs a novel 7-DOF (degree of freedom) humanoid manipulator based on the arm structure of human bionics. The 3-2-2 structural arrangement of the motors and the structural modifications at the wrist allow the manipulator to act more similar to a man. Meanwhile, to manipulate the steering wheel stably and compliantly, an admittance control approach is firstly applied for this case. Considering that the system parameters vary in configuration, we further introduce parameter fuzzification for admittance control. Designed simulations were carried out in Coppeliasim to verify the proposed control approach. As the result shows, the improved method could realize compliant force control under extreme configurations. It demonstrates that the humanoid manipulator can twist the steering wheel stably even in extreme configurations. It is the first exploration to operate a steering wheel similar to a human with a manipulator by using admittance control.
High authenticity steering feel control strategy for Steer-by-Wire system based on terminal sliding mode rack force observer

Guobiao Shi,Tingyang Liu,Shuai Wang,Cong Guo,Yu Liu

DOI: https://doi.org/10.1177/09544070241233859

2024-03-12

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. This article proposes a high authenticity steering feel control strategy for Steer-by-Wire (SBW) system based on terminal sliding mode rack force observer, in response to the issue of how to design the steering feel of the SBW system to reflect road conditions. Firstly, a terminal sliding mode rack force observer is designed to achieve real-time and accurate estimation of steering system rack force. Then, based on the vehicle motion state, design the feedback characteristic curve of the rack force and the compensation torque of the handwheel to obtain the expected steering feel, and use the automatic disturbance rejection controller (ADRC) method to control the voltage of the handwheel motor. In simulation testing, a SBW open loop control system model is established to verify the performance of the designed rack force observer. The objective evaluation indicators are used to verify that the designed feedback method can intuitively adjust and meet the driver's steering feel needs, and the impact of various compensation torques on the evaluation indicators is analyzed. Finally, the results of actual vehicle experiments indicate that the designed method can provide suitable steering feel, verifying the feasibility of the design technology.

engineering, mechanical,transportation science & technology
Electric Power Steering Automation for Autonomous Driving

J. E. Naranjo,C. González,R. García,T. de Pedro

DOI: https://doi.org/10.1007/11556985_67

2005-01-01

Abstract:The automatic control of a vehicle’s steering wheel is now one of the most important challenges in the Intelligent Transportation Systems field. In this paper, we present a fuzzy logic-based automatic steering control system for mass-produced electric power steering (EPS) wheel-equipped vehicles that assures human-like behavior. In the literature, we find a lot of theoretical proposals and some simulations, but only a few work teams offer real solutions for this task. One such solution is the work developed by the Autopia Program in which some vehicles have been automated and can perform some maneuvers mimicking human reactions. In this paper, we use the EPS of a Citroën C3 Pluriel to effect the car’s behavior. The actuator is controlled from an onboard computer housing a fuzzy logic-based autonomous steering system. The vehicle’s internal computers generate the input information, which is read by a CAN bus and a high precision GPS. Some experiments using this equipment on a private test circuit are presented, obtaining an human-like behavior in all the maneuvers.
A Friction-Driven Strategy for Agile Steering Wheel Manipulation by Humanoid Robots

Zhaoyang Cai,Xin Zhu,Pierre Gergondet,Xuechao Chen,Zhangguo Yu

DOI: https://doi.org/10.34133/cbsystems.0064

2023-11-20

Abstract:Vehicle driving can substantially enhance the maneuverability of humanoid robots. Agile steering wheel manipulation requires rapid rotation in narrow spaces such as a cab, serving as the foundation for increasing driving speed, especially in an obstacle avoidance scenario. Generally, there are 3 human driving strategies, "Hand-to-Hand," "Hand-over-Hand," and "One-Hand." Based on the human driving motion data, we quantitatively analyze these strategies from 3 aspects, motion range of joint combination, motion region of the shoulder, and velocity of the manipulation. Then, a friction-driven manipulation strategy using one hand is proposed utilizing the similarity between a humanoid robot and a driver (human). It effectively addresses the requirements of both a small range of motion and rapid manipulation. To prevent the deformation of the steering wheel caused by excessive force, we construct an operating force model specifically for the steering wheel. This model accurately describes the relationship between the rotation resistance and the state of the steering wheel. In addition, we propose a quadratic programming (QP)-based control framework to servo the robot to track the end-effector position and target wrench output by this model. Finally, the effectiveness of this paper is evaluated through an obstacle avoidance scenario, achieving a maximum rotation velocity of 3.14 rad/s.
Research on control strategy and bench test of automobile Steer-by-Wire system

Liu Feng,Yu Lei-yan,Qi Yao-guang

DOI: https://doi.org/10.1109/VPPC.2008.4677534

2008-11-18

Abstract:Steering by Wire system is a revolution of steering system structure and function.lt cuts off the mechanical connection between steering wheel and steered wheels ,controls the steering motor to steer front wheels actively so as to improve handling and stabilities and active safety,and controls steering wheel motor to supply the driver with ideal road feel. First, driver-vehicle-road closed loop models of Steering by Wire system are built based on Matlab/Simulink.Model parameters are optimized using genetic algorithm. Upper control strategies of Steering by Wire system include active steering control strategy ,which include feed forward type and feedback type,and road feel control strategy. Steering ratios under different velocities are optimized by genetic algorithm with closed -loop total variance as fitness function in feed forward type of steering control strategy.Yaw rate is feedback to increase system damp and bandwidth and improve stability in feedback type of steering control strategy. One road feel control strategy adjusts steering wheel feedback torque according to steering wheel angle and velocity .In the other road feel control strategy,tire restoring torque is estimated to supply the driver with appropriate road feel.Evaluation of road feel is analyzed. In lower control strategy,PID control is adopted to control steering motor to realize target front wheel angles determined by active steering control strategy and controls front wheel motor to realize target steering wheel feedback torques determined by road feel control strategy. Finally, Steering by Wire system bench test is conducted to evaluate both steering and road feel control strategies.

Engineering

Multidimensional phenotyping of breast cancer cell lines to guide preclinical research

Research on Force Characteristics of Steering-wheel System in Tracked Vehicle Simulator

Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller

Design of steering wheel torque with human-machine interaction for uncoupled shared steering

Auxiliary Steering Control of Vehicle Driving with Force/Haptic Guidance

Adaptive Driver-Automation Shared Steering Control via Forearm Surface Electromyography Measurement

Indirect Shared Control for Cooperative Driving Between Driver and Automation in Steer-by-Wire Vehicles

Analysis of Human-Machine Cooperation When Driving with Different Degrees of Haptic Shared Control

Road Sense Construction for Steer-by-Wire System: Data-Driven Feedback Torque Design and Friction Compensated Explicit Model Predictive Control

Shared and traded control for human-automation interaction: a haptic steering controller and a visual interface

Sharing control with haptics: seamless driver support from manual to automatic control

Human–Machine Collaboration for Automated Driving Using an Intelligent Two‐Phase Haptic Interface

A Shared Steering Controller Design Based on Steer-by-wire System Considering Human-Machine Goal Consistency.

A Fuzzy Logic Shared Steering Control Approach For Semi-Autonomous Vehicle

Toward Consumer Acceptance of Cooperative Driving Systems: A Human-Centered Shared Steering Control Approach Within a Hierarchical Framework.

Human-Machine Collaboration for Automated Vehicles via an Intelligent Two-Phase Haptic Interface

An Admittance Control Method Based on Parameters Fuzzification for Humanoid Steering Wheel Manipulation

High authenticity steering feel control strategy for Steer-by-Wire system based on terminal sliding mode rack force observer

Electric Power Steering Automation for Autonomous Driving

A Friction-Driven Strategy for Agile Steering Wheel Manipulation by Humanoid Robots

Research on control strategy and bench test of automobile Steer-by-Wire system