Abstract:To further improve the mechanical properties and corrosion resistance of the biodegradable magnesium (Mg) alloy, the Mg-4Zn-0.5Sr-xAg alloy (x = 0.2 wt.%, 0.5 wt.%, 1.0 wt.%, and 2.0 wt.%) was smelted in vacuum under the protection of inert gas. The effect of the Ag content on the microstructure and mechanical properties of Mg-4Zn-0.5Sr was tested. The results show that the comprehensive properties of Mg-4Zn-0.5Sr-0.5Ag are best. The grain size of the Mg-4Zn-0.5Sr-0.5Ag alloy is minimal, that is, 83.28 μm. The average tensile strength (σb), yield strength (σs), elongation (ε), and hardness for the Mg-4Zn-0.5Sr-0.5Ag alloy is 168.00 MPa, 88.00 MPa, 12.20%, and 59.90 HV, respectively. To further improve the properties of cast Mg-4Zn-0.5Sr-0.5Ag alloy, extruding treatment was conducted. After extrusion deformation, the grain size of the alloy was significantly refined to 9 μm; at the same time, fine second phases were formed and evenly distributed in the matrix. And then, the mechanical properties of the alloy are significantly enhanced due to the effect of fine crystal strengthening and dispersion strengthening. The σb, σs, ε, and hardness value for the extruded Mg-4Zn-0.5Sr-0.5Ag alloy are 236.00 MPa, 212.00 MPa, 18.97%, and 65.42 HV, respectively. Under the synergistic action of adding the Ag element and extrusion treatment, the grain size of the alloy was significantly refined and the coarse second phase in the alloy became refined to disperse in the matrix, which benefits the formation of electric couples characterized as small cathode–large anode between the second phase and Mg matrix. During full immersion, corrosion products covered on the large anode surface could reduce the galvanic corrosion tendency.

Study of preparation and stabilizability properties of Mg-based amorphous alloy

Improvement of corrosion resistance in NaOH solution and glass forming ability of as-cast Mg-based bulk metallic glasses by microalloying

Preparation and Mechanical Properties of Mg-Ni-Gd-Ag Amorphous Alloy

Preparation and Discharge Properties of Amorphous Mg_(65-x)Ni_(21)Pr_(14) Agx Alloy Electrodes

Surface microstructure and corrosion resistance characterization of Mg-based amorphous alloys

Corrosion Behavior and Mechanical Properties of Mg–Zn–Ca Amorphous Alloys

An electrochemical investigation of mechanical alloying of MgNi-based hydrogen storage alloys

Properties of Amorphous Mg 65 Ni 10 RE 25 (re=la, Ce, Pr, Nd, Mm) Hydrogen Storage Alloys Electrode

The Synergistic Effect of Trace Ag and Hot Extruding on the Microstructure and Properties of a Biodegradable Mg-Zn-Sr-Ag Alloy

Effects of micro-alloying Ag on microstructure, mechanical properties and corrosion behavior of extruded Mg-2Zn-0.2Ca-xAg alloys

Ductile behavior and excellent corrosion resistance of Mg-Zn-Yb-Ag metallic glasses

The effect of Gd on the microstructure and electrochemical properties of Mg-Ni-based alloys

Effects of graphene/silver nanohybrid additives on electrochemical properties of magnesium-based amorphous alloy

Effects of the partial substitutional alloying elements on the crystallization behavior of Mg65Cu25Gd10 metallic glass: Ag versus Ni

Microstructural Investigation and Electrochemical Property of Mg63Ni27Nd10 Amorphous Alloy

A Comparative Study of the Role of Ag in Microstructures and Mechanical Properties of Mg-Gd and Mg-Y Alloys

Study on Solution and Aging Heat Treatment of a Super High Strength Cast Mg-7.8Gd-2.7Y-2.0Ag-0.4Zr Alloy

STRUCTURAL RELAXATION AND MECHANICAL PROPERTIES OF Mg-Cu-Ni-Gd AMORPHOUS ALLOYS

Engineering Atomic-to-Nano Scale Structural Homogeneity towards High Corrosion Resistance of Amorphous Magnesium-Based Alloys

Preparation of Mg70Ni15Gd10Ag5 Bulk Amorphous Alloys and Their Crystallization Behaviors

Structural Relaxation, Glass-Forming Ability and Mechanical Properties of Mg–Cu–Ni–Gd Alloys