Abstract:The characteristics of geotechnical engineering related structure such as tunnels, foundations and retaining walls are as follows: (1) The structure is normally buried underground and visual inspection of the health condition is not possible in most cases. (2) Due to the complicated geological and hydrological conditions, a number of uncertainties are involved in the design and construction of geotechnical structures. (3) Some of the geotechnical structures are super long and large. Therefore, the requirements of real-time and long-distance monitoring of these geo-structures are of great importance. Some key geo-structures such as large-span tunnel, underground facilities and foundations require the measurement accuracy in the order of micron or millimeter. Hence the conventional monitoring techniques cannot meet the demands for geo-structure health monitoring.Brilliouin Optical Time Domain Reflectometry/Analysis (BOTDR/A) is a fully distributed measurement technique, which utilizes Brilliouin spectroscopy and Optical Time Domain Reflectometer/Analyzer to measure strains generated in optical fibers as distributed in the longitudinal direction. Fiber Bragg Grating (FBG) is a qusai-distributed monitoring technique, which is a type of distributed Bragg reflector constructed in a short segment of optical fiber that reflects particular wavelengths of light and transmits all others. The reflected wavelength is proportional to the applied strain and temperature and the FBG sensor can therefore be used as a strain or temperature sensor. Because of the distinctive characteristics of the distributed optical fiber sensing technologies, they have been paid more and more attention and began to be used to construct monitoring systems of various geo-structures such as tunnels, embankments and soil nailed slopes. In this paper, the operation principles and merits of BOTDR/A and FBG are introduced; their application feasibility on the geo-structure health monitoring are analyzed based on the authors' research achievements and application cases; the related topics about application of BOTDR/A and FBG are discussed in detail, which include the installation methods of optical fiber, the impact of distance, temperature and humidity resolution on measurement results, the fatigue effect of optical fiber, the conversion from strain to deformation and the establishment of intelligent monitoring system. The research results show that the distributed optical fiber sensing technologies are quite applicable to the geo-structure health monitoring.

Development and evaluation of PPP-BOTDA based optical fiber three dimension strain rosette sensor

Pulse-Pre Pump Brillouin Optical Time Domain Analysis-Based Method Monitoring Structural Multi-Direction Strain

Performances of Distributed Fiber Optic Strain Sensor with Thin-Walled Ring

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Fast Distributed Brillouin Optical Fiber Sensing for Dynamic Strain Measurement

A New Distributed Optical Fiber Sensor For Structural Health Monitoring - Botdr

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement

Fiber-reinforced polymer-packaged optical fiber sensors based on Brillouin optical time-domain analysis

Distributed Measurement of Dynamic Strain Based on Multi-Slope Assisted Fast BOTDA.

A Distributed Optical Fiber Sensing System for Dynamic Strain Measurement Based on Artificial Reflector

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

Strain Variation Measurement with Short-Time Fourier Transform-Based Brillouin Optical Time-Domain Reflectometry Sensing System

Study on calibration of distributed optical fiber sensors based on BOTDR

High-Spatial-Resolution Fast BOTDA for Dynamic Strain Measurement Based on Differential Double-Pulse and Second-Order Sideband of Modulation

Experimental Analysis on Real-time Distributed Strain Measurement in Concrete

Distributed optical fiber sensing based on the combination of Brillouin and Rayleigh scattering

Stain monitoring for tunnel using distributed optical fiber BOTDR sensors

High Spatial Resolution Internal Stress Testing and Analysis of Fiber Optic Winding Structure Using BOTDA

Application of Distributed Optical Fiber Strain Measurement into Geotechnical Engineering Monitoring

Research on Distributed Fiber Optical Strain Testing Technology Based on the Adam Algorithm

Experimental Investigation of RC Beams Using BOTDA(R)-FRP-OF