Abstract:Generally, optical methods for precision measurement have limitations when rotation of large angle (larger than 10°) and translation of large range occur simultaneously. To deal with the problem, an improved method based on spatial magnetic detection is proposed for planar 3-degree-of-freedom position measurement with large ranges in this article. The position-solving algorithm of the method calculates position by decoupling 3 degrees of freedom with the magnetic flux densities of the inherent magnetic field of the permanent-magnet synchronous planar motor detected by the proposed Hall-sensor array. On the basis of previous work, the calculation approach of decoupling is improved; as a result, the calculations for solving position are simplified. The characteristics of the sensor topology are exploited further, and a new calculation approach of decoupling is introduced to compensate the original one, achieving better robustness to noise. The ability of solving 3-degree-of-freedom position and the robustness to noise and magnetic-field imperfections are evaluated by simulation; the results show that the accuracies of translational and rotational motions are 10 µm scale and 0.1° scale in the case with noise of 0.01% of signal amplitude, while they are 100 µm scale and 10° scale in the case with the magnetic-field imperfections caused by parameter deviations. Comparison experiments with commercial sensors are conducted on a self-developed testing platform to verify the feasibility of the method, and the results show that the method can achieve sensing a large rotational angle and a large translational range with a simple implementation.

Hall Effect Based Tracking Position Sensor

A Position Measurement Method for 3-Degree-of-freedom Motion Based on Magnetic Detection.

Electromagnetic field analysis and modeling of a relative position detection sensor for high speed maglev trains

Single-Chip Integrated 3-D Hall Sensor

Analog-Hall-Sensor-Based Position Detection Method With Temperature Compensation For Permanent-Magnet Linear Motor

A Hall Sensor-Based Position Measurement with On-Line Model Parameters Computation for Permanent Magnet Synchronous Linear Motor

A novel planar 3D magnetic position measurement methodology using linear Hall sensors

Optimization of Hall Position Sensor for Permanent Magnet Synchronous Linear Motors

Planar 3-Degree-of-freedom Position Sensing Method Based on Decoupling Using a Linear-Hall Array

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

An analytic algorithm based position and orientation detection using a tri-axial magnetoresistive sensor.

Implementation of Embedded Magnetic Encoder for Rotor Position Detection Based on Arbitrary Phase-Shift Phase-Lock Loop

Design of the Rotor Position Detecting Circuit Based on One Discrete Hall Sensor

An Improved PMSM Rotor Position Sensor Based on Linear Hall Sensors

6-D Electromagnetic Tracking Approach Using Uniaxial Transmitting Coil and Tri-Axial Magneto-Resistive Sensor

Research on Rotor Position Estimation of PMSM Based on Hall Position Sensor

Development of a combined magnetic encoder

An Improved Position Detection Method for Permanent Magnet Linear Motor Using Linear Hall Sensors

A high precision position sensor design and its signal processing algorithm for a maglev train

Position Sensors for Industrial Applications Based on Electromagnetic Encoders

Position Detecting for the Air-Cored TPMLSM with Linear Hall-effect Sensors