Abstract:To study the evolution of stress on the ring and segment interfaces during the construction process of the concrete encapsulation of the main arch ring in a rigid-frame arch bridge, alongside its impact on the ultimate load-bearing capacity of the main arch ring, a 1:10 scale model experiment was conducted by taking the 600 m Tian'e Longtan Bridge as the prototype. The key cross-section concrete strain data were collected during the entire construction process of the main arch ring via fiber-optic strain sensors, which were used to investigate the stress evolution at ring and segment interfaces. ANSYS APDL was employed to simulate the ultimate bearing capacity under various loading conditions of two different finite element models, which were, respectively, formed segmentally and by single pouring. The results revealed that (1) after the closure of the concrete encapsulation of the main arch ring, the concrete stress in the cross-section exhibits significant stress disparities. At the same cross-section, the level of the web concrete stress can reach 76% of the floor concrete stress, while the roof concrete stress level is less than 20% of the floor concrete stress. (2) At the junction of two adjacent work planes, there are considerable differences in the stress levels of the concrete on both sides. After the closure of the main arch ring, the intersegment stress ratios of the floor, web, and roof concrete are 60~70%, 40~60%, and 0~5%, respectively. (3) Loading conditions remarkably affected the ultimate bearing capacity of the main arch ring. Under mid-span loading and 1/4 span symmetrical loading conditions, compared to single-pour concrete encapsulation, the ultimate bearing capacity of the main arch ring with concrete encapsulated by segmented and ring-divided pouring decreased by 19.16% and 5.23%, respectively, compared to single-pour concrete encapsulation. This suggests that the non-uniformity of stress distribution in the concrete sheath can lead to reductions in the ultimate bearing capacity of the arch ring.

Progressive-Collapse Simulation And Critical Region Identification Of A Stone Arch Bridge

Progressive Collapses Simulation And Importance Assessment Of Stone Arch Bridge

Progressive Collapse Simulation and Components Importance Evaluation of a Stone Arch Bridge

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Effect of Transverse Earthquake Action on Development of Seismic Damage of Steel Arch Bridges

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Overload-Induced Progressive Collapse Simulation For A Reinforced Concrete Arch Bridge

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Elastic and Inelastic Stability of a Steel Arch Subjected to a Crown Point Load under an Elevated Fire Environment

Collapse Behavior of Non-Uniform Shallow Arch under a Concentrated Load for Fixed and Pinned Boundary Conditions

Analysis of Flood Resistance of Masonry Arch Bridges Combining Numerical Simulation and Probabilistic Analysis

Progressive Collapse Safety Evaluation of Truss Structures Considering Material Plasticity

Analysis on Progressive Collapse of Conservatory Steel Structure

Probability-Based Progressive Collapse-Resistant Assessment for Reinforced Concrete Frame Structures

Evolution Law of Concrete Interface Stress of Rigid-Frame Arch under Construction and Its Impact on Ultimate Load-Bearing Capacity

New Analytical Calculation Models for Compressive Arch Action in Reinforced Concrete Structures

Numerical Simulation for the Progressive Collapse of Concrete Building due to Earthquake

Stability behavior and new construction process for a five-span CFST arch bridge

Analysis of Supporting Mechanism of Steel Arch Frame in Tunnel Collapse

STUDY ON THE DESIGN METHODS TO RESIST PROGRESSIVE COLLAP- SE FOR BUILDING STRUCTURES