Abstract:To study the evolution of stress on the ring and segment interfaces during the construction process of the concrete encapsulation of the main arch ring in a rigid-frame arch bridge, alongside its impact on the ultimate load-bearing capacity of the main arch ring, a 1:10 scale model experiment was conducted by taking the 600 m Tian'e Longtan Bridge as the prototype. The key cross-section concrete strain data were collected during the entire construction process of the main arch ring via fiber-optic strain sensors, which were used to investigate the stress evolution at ring and segment interfaces. ANSYS APDL was employed to simulate the ultimate bearing capacity under various loading conditions of two different finite element models, which were, respectively, formed segmentally and by single pouring. The results revealed that (1) after the closure of the concrete encapsulation of the main arch ring, the concrete stress in the cross-section exhibits significant stress disparities. At the same cross-section, the level of the web concrete stress can reach 76% of the floor concrete stress, while the roof concrete stress level is less than 20% of the floor concrete stress. (2) At the junction of two adjacent work planes, there are considerable differences in the stress levels of the concrete on both sides. After the closure of the main arch ring, the intersegment stress ratios of the floor, web, and roof concrete are 60~70%, 40~60%, and 0~5%, respectively. (3) Loading conditions remarkably affected the ultimate bearing capacity of the main arch ring. Under mid-span loading and 1/4 span symmetrical loading conditions, compared to single-pour concrete encapsulation, the ultimate bearing capacity of the main arch ring with concrete encapsulated by segmented and ring-divided pouring decreased by 19.16% and 5.23%, respectively, compared to single-pour concrete encapsulation. This suggests that the non-uniformity of stress distribution in the concrete sheath can lead to reductions in the ultimate bearing capacity of the arch ring.

Progressive Collapse Simulation and Components Importance Evaluation of a Stone Arch Bridge

Progressive Collapses Simulation And Importance Assessment Of Stone Arch Bridge

Progressive-Collapse Simulation And Critical Region Identification Of A Stone Arch Bridge

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Damage Characteristics of Thin-Walled Steel Arch Bridges Subjected to In-Plane Earthquake Action

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Effect of Transverse Earthquake Action on Development of Seismic Damage of Steel Arch Bridges

Overload-Induced Progressive Collapse Simulation For A Reinforced Concrete Arch Bridge

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Study on Design and Maintenance Strategy of Concrete Bowstring Arch Bridge Based on Given Service Life of Structure

Analysis of Flood Resistance of Masonry Arch Bridges Combining Numerical Simulation and Probabilistic Analysis

Scene Simulation of Bridge Collapse Based on Finite Element Analysis and Virtual Reality Technology

Maintenance strategy and method of concrete arch bridges in life cycle i: performance levels and performance requirements

Maintenance strategy and method of concrete arch bridges in life cycle ii: performance degradation analysis and repair reinforcement methods

Simulation of Bridge Collapse in Virtual Scene Based on Finite Element Analysis

Dynamic Response and Robustness Evaluation of Cable-Supported Arch Bridges Subjected to Cable Breaking

State-of-the-Art Review on the Causes and Mechanisms of Bridge Collapse

A study of stone arch bridge's flood reliability through a surrogate model approach

Numerical Study on the Mechanical Performance of a Flexible Arch Composite Bridge with Steel Truss Beams over Its Entire Lifespan

Evolution Law of Concrete Interface Stress of Rigid-Frame Arch under Construction and Its Impact on Ultimate Load-Bearing Capacity