Abstract:Unfilled and carbon black filled natural rubber have attracted considerable attention and have been extensively used as a novel construction material in civil infrastructure applications because of their superior physical and mechanical properties. However, their mechanical behavior is highly nonlinear and further complicated by the significant sensitivity to the loading rate. In this paper, a generalized constitutive model was proposed to improve the description of rate-dependent mechanical behavior of unfilled and carbon black filled natural rubber. The proposed model consisted of a hyperelastic spring to characterize the equilibrium response and a Maxwell element to capture the rate dependency as well as link the overstress to the loading rate. Subsequently, the stress–strain response of both unfilled and filled natural rubber subjected to the cyclic shear loading with different strain rates was experimentally characterized, multi-step relaxation and cyclic shear tests were carried out to calibrate material parameters in the model. Afterwards, a nonlinear viscosity coefficient was derived to completely establish the proposed model and its three-dimensional function versus strain and strain rate was also obtained based on the experimental data. Finally, comparing numerical simulations with cyclic shear tests and real-time hybrid simulation tests, it was found that the simulated results were in good agreement with the test results, indicating the proposed model is capable to accurately describe the hyper-viscoelastic behavior of both unfilled and filled natural rubber under cyclic shear loading, which might become an appropriate choice to be used by researchers and engineers for civil structural applications.

Comparison of two hyperelastic models for carbon black filled rubber

Hyperelastic Behavior of Two Rubber Materials under Quasistatic and Dynamic Compressive Loadings - Testing, Modeling and Application

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

A Revised Mooney Model of Carbon Black Filled-rubber Materials

Application of Hyperelastic Constitutive Models in Finite Element Analysis on Tires

Study of the Effect of Carbon Black Filling on the Mechanical Behavior of Rubber Hyper-Elasticity

A Novel Constitutive Model of Carbon Black Rubber for the Numerical Analysis of Press-Fitting of Rubber Bushing

Numerical simulation and analysis of carbon-reinforced rubber's Mullins effect

Generalized Hyper-Viscoelastic Modeling and Experimental Characterization of Unfilled and Carbon Black Filled Natural Rubber for Civil Structural Applications

Three-dimensional numerical simulations on the hyperelastic behavior of carbon-black particle filled rubbers under moderate finite deformation

A novel viscoelastroplastic constitutive model of rubber materials and parameter identification

Tension responses of carbon black filled rubbers at intermediate and high strain rates: Experimental investigation and modeling

Pseudo-Elastic Analysis with Permanent Set in Carbon-Filled Rubber

A comparative study of 85 hyperelastic constitutive models for both unfilled rubber and highly filled rubber nanocomposite material

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates

Study on Hybrid Hyperelastic Constitutive Model for Rubber Material

A Novel Planar Tension Test of Rubber for Evaluating the Prediction Ability of the Modified Eight-Chain Model under Moderate Finite Deformation

Prediction of the Elastic Properties of Multiwalled Carbon Nanotube Reinforced Rubber Composites

New Compressible Hyper-Elastic Models for Rubberlike Materials

A Study on the Effects of Hyperelastic Constitutive Models on the Static Characteristic Prediction of Rubber Isolator

The Study on Rubber’s Constitutive Model about Parameters Identification and the Effect of Fitting Error