Abstract:Small wind turbines operating in low wind speed regions have not had any significant success. In addition, small wind speed regions occupy a large area of the world, so they represent a potential area for installing small wind turbines in the future. In this paper, a method to design an efficient airfoil for small wind turbines in low wind speed conditions using XFLR5 and CFD simulations is implemented. Because the impact of the airflow on the blade surface under low Re number conditions can change suddenly for small geometries, designing the airfoil shape to optimize the aerodynamic performance is essential. The tuning of the key geometric parameters using inversion techniques for better aerodynamic performance is presented in this study. A two-dimensional model was used to consider the airflow on the airfoil surface with differences in the angle of attack. The original S1010 airfoil was used to design a new airfoil for increasing the aerodynamic efficiency by using V6.57 XFLR5 software. Subsequently, the new VAST-EPU-S1010 airfoil model was adjusted to the maximum thickness and the maximum thickness position. It was simulated in low wind speed conditions of 4–6 m/s by a computational fluid dynamics simulation. The lift coefficient, drag coefficient, and CL/CD coefficient ratio were evaluated under the effect of the angle of attack and the maximum thickness by using the k-ε model. The simulation results show that the VAST-EPU-S1010 airfoil achieved the greatest aerodynamic efficiency at an angle of attack of 3°, a maximum thickness of 8%, and a maximum thickness position of 20.32%. The maximum value of CL/CD of the new airfoil at 6 m/s was higher than at 4 m/s by about 6.25%.

A Method to Evaluate the Overall Performance of the CAS-W1 Airfoils for Wind Turbines

EXPERIMENT AND ANALYSIS OF AERODYNAMIC PERFORMANCE FOR CAS THIN AIRFOILS USED OF WIND TURBINE BLADES

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

A new optimization approach to improve the overall performance of thick wind turbine airfoils

ROUGHNESS SENSITIVITY ANALYSIS AND OPTIMIZATION OF CAS AIRFOILS USED AT OUTBOARD SECTION OF WIND TURBINE BLADE

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Optimized design of wind turbine airfoil aerodynamic performance and structural strength based on surrogate model

Numerical Simulation of Unsteady Aerodynamic Performance of Novel Adaptive Airfoil for Vertical Axis Wind Turbine

Numerical Analysis of Leading-Edge Roughness Effects on the Aerodynamic Performance of a Thick Wind Turbine Airfoil

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Overall Design Optimization of Dedicated Outboard Airfoils for Horizontal Axis Wind Turbine Blades

Numerical Study of Aerodynamic Performance of a High Solidity H-type Wind Turbine

The inverse design of wind turbine airfoil

Experimental Study on Wavy Edge Aerodynamic Characteristics of Big Thick of Wind Turbine Airfoil

EFFECTS OF INSTALLATION METHOD OF ASYMMETRIC AIRFOILS ON PERFORMANCE OF H-TYPE WIND TURBINE

Influence of Roughness on Aerodynamic Performance of Dedicated Wind Turbine Airfoil

NUMERICAL SIMULATION FOR PNEUMATIC CHARACTERISTICS FOR TWO-DIMENSIONAL AIRFOILS LARGE WIND TURBINE

OPTIMIZATION AND DESIGN METHOD RESEARCH OF WIND TURBINE AIRFOILS BASED ON CFD TECHNIQUE

Simulation Analysis and Experimental Study on Airfoil Optimization of Low-Velocity Turbine

Investigation on roughness sensitivity for 21% relative thickness airfoil of wind turbine blade

A Method to Design an Efficient Airfoil for Small Wind Turbines in Low Wind Speed Conditions Using XFLR5 and CFD Simulations