Abstract:Reactor core is the pivotal component of nuclear power system, and its integrity is an important prerequisite for safe operation of reactor. Traditional nuclear reactor core thermalhydraulic analysis methods cannot meet the high precision simulation requirements of advanced nuclear power systems in the future. In this paper, based on open source CFD platform OpenFOAM, a coolant flow heat transfer model considering diffusion due to turbulent mixing between adjacent coolant channels and rod bundle structure characteristics of pressurized water reactor (PWR) was established. A fuel rod heat conduction model was built to describe the internal temperature distribution formed by multiple nodes placed along the radial direction of fuel rods, and a coupled heat transfer model were proposed according to the mapping relationship between the external boundary condition of fuel rod heat conduction equation and convective heat transfer energy source term in coolant governing equation. The threedimensional subchannel thermal-hydraulic characteristics analysis code CorTAF for PWR core based on finite volume method was developed. After that, various fuel assembly flow and heat transfer experiments were selected to carry out model validation. For GE3×3 experiment, the calculated results of coolant velocity distribution in each channel of test section agree well with the experimental data, indicating that the CorTAF code can predict the flow characteristics in the fuel assembly effectively against COBRA code with similar computational accuracy. For Weiss experiment, the calculated results of coolant flow rate distribution in each assembly of test section are in good agreement with the experimental data, which illustrates that the CorTAF code can accurately predict the flow characteristics in parallel open assemblies under inlet partially blocked condition. For PNL2×6 experiment, the calculated results of coolant temperature and velocity distribution along center line of experimental section are basically consistent with the experimental data and those calculated by CUPID and MATRA codes, demonstrating that the CorTAF code can obtain the flow and heat transfer characteristics in the rod bundle assembly under condition of transverse nonuniform heating, and the error may be caused by the difference of data acquisition methods. In conclusion, the CorTAF code is proved to be suitable for predicting the flow and heat transfer characteristics in the rod bundle fuel assembly. The work in this paper has reference significance for the development of core safety analysis tools for PWR. Subsequently, further model optimization and thermalhydraulic characteristics analysis of the full PWR core under both steadystate operation and transient accident conditions will be carried out, and research on neutronics and thermalhydraulics coupling will be performed based on OpenFOAM.

Numerical Simulation of Temperature and Flow Fields Under Steady State Condition in Core for TP-1 Sodium Cooled TWR Based on Porous Media Model

PWR core transient temperature numerical simulation based on porous media model

Numerical simulation on coolant flow and heat transfer in core

Three Dimensional Thermal Hydraulic Characteristic Analysis of Reactor Core Based on Porous Media Method

Research on Single Channel and Subchannel in Thermal-hydraulic Analysis of TP-1 Sodium Cooled TWR

ThermaI-hydrauIics anaIysis in traveIing-wave reactor based on FLUENT software coupIing with point reactor kinetic modeI

Numerical Simulation of Flow-Thermal Coupling Field Inside Upper Plenum and Hot Legs of Pressurized Water Reactor (Pwr)

Research on CFD Calculation and Analysis Technology of Porous Media in Sodium Cooled Fast Reactor Core

Development and Preliminary Validation of Three-dimensional Subchannel Thermal-hydraulic Analysis Code CorTAF for Numerical Reactor Core

Steady-state Thermal-Hydraulic Analysis of an NTP Reactor Core Based on the Porous Medium Approach

Prediction of Flow and Temperature Distributions in a High Flux Research Reactor Using the Porous Media Approach

CorTAF: A nuclear reactor core three-dimensional thermal-hydraulic characteristics analysis code based on OpenFOAM

Numerical and Experimental Studies for Thermal Mixing of Coolant in a Core Bottom Structure of HTTR.

Coupled Neutronic and Thermal-Hydraulic Analysis of TMSR-SF1 at Steady State

Thermal Hydraulic Modeling of High Temperature Gas-Cooled Reactor Core in System Simulator

Numerical Simulation on Thermal-Hydraulic and Thermoelectric Characteristics of the TOPAZ-II Reactor Core

Three-dimensional modeling and thermal hydraulic analysis of high temperature gas-cooled reactor core

Numerical Simulation of Three Dimensional Internal Flow of A Pwr Reactor

Transient and Safety Analysis Code for Tp-1 Sodium Cooled Twr

Study on Thermohydraulic Characteristics of Pebble Bed Water Cooled Reactor Core

Numerical Simulation of Flow Distribution in the Lower Plenum of NHR200-II