Abstract:Parabolic Trough Collectors (PTCs) are commonly employed in both industrial and residential settings for the purpose of harnessing solar energy. Several techniques have been implemented to improve performance, such as altering the geometry of the absorber tube, enhancing the selective coatings of the receiver envelope, and utilizing nanofluids . This study proposes a new method for enhancing the thermal-hydraulic efficiency of PTCs through the utilization of non-uniform heat flux distribution on conical solar receiver. The effectiveness of this approach is evaluated through numerical simulations conducted using Ansys Fluent with the aid of optical simulation performed using TracePro. The geometry under consideration is assessed at various diameter ratios (DR) spanning from 1.25 to 2 and Reynolds number ( Re ) ranging from 20000 to 100000, with increments of 20000. This evaluation is conducted at three distinct inlet temperatures : 150 °C, 250 °C, and 350 °C. The studied parameters include-the Nusselt number ( Nu ), friction coefficient ( f ), thermal efficiency ( ηth ), exergetic efficiency ( ηex ), and thermal enhancement factor (TEF). Furthermore, a comparative analysis is conducted between the newly proposed geometric design and a traditional straight absorber and glass structure. The findings indicated that a conical receiver generally enhances system heat transfer by a minimum of 7 % and up to 65 %, resulting in improved thermal and exergetic efficiencies. Decreasing the pipe outlet diameter from DR = 1.25 to DR = 2 led to a significant exponential rise in the friction coefficient. The TEF demonstrated that a diameter ratio of 1.25 and 1.5 resulted in maximum values of 1.19 and 1.11, respectively, at high Re and an inlet temperature of 350 °C. The results suggested that incorporating conical receivers in PTCs can greatly improve their performance. To minimize the friction coefficient and associated pumping power, it is crucial to carefully evaluate the reduction of the diameter of the absorber outlet. The results offered valuable insights for the development and improvement of PTCs in both industrial and power generation settings, promoting the adoption of renewable energy and supporting long-term sustainability.

An Indoor Experimental Investigation of the Thermal Performance of a TPLT-based Natural Circulation Steam Generator As Applied to PTC Systems

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Effect of receiver diameter ratio on thermal performance of natural circulation steam generation system as applied to parabolic trough collector using water as working fluid

Performance Analysis of a Separator Assisted Two-Phase Thermosyphon Based on an Experimentally Validated Model

Experimental investigation of a natural circulation parabolic trough collector system for medium-high temperature steam generation

An Experimental Investigation of a Natural Circulation Heat Pipe System Applied to a Parabolic Trough Solar Collector Steam Generation System

Experimental investigation of effect of heat load on thermal performance of natural circulation steam generation system as applied to PTC-based solar system

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Investigation of the thermal response characteristics of the loop thermosyphon under convective boundary conditions

Thermal-hydraulic performance analysis of a novel parabolic trough receiver with double tube for solar cascade heat collection

Experimental investigation on the thermal performance of high temperature two-phase loop thermosyphon

Experimental Investigation on a Parabolic Trough Solar Collector for Thermal Power Generation

Performance Investigation of a Novel Thermosyphon Based Trilateral Cycle Using Hydraulic Turbine for Power Generation Instead of Two-Phase Expander

Experimental investigation and annual performance mathematical-prediction on a novel LT-PV/T system using spiral-descent concentric copper tube heat exchanger as the condenser for large-scale application

Thermal characteristics of a two-phase loop thermosyphon with micro-grooved structures inside the evaporator

Thermal performance of parabolic trough solar collector employing novel absorber tubes equipped with distinct heat transfer fluids: An experimental study

Improving the Performance of Steam Power Cycle Through Thermo-Photovoltaic Device: A Novel Combined System and Thermodynamic Analysis

Thermal performance investigation of the newly shaped vacuum tubes of parabolic trough collector system

Hydrothermal performance assessment of a parabolic trough with proposed conical solar receiver

Research on the Refrigerant Distribution and Distinctive Flow Phenomena in a Two-Phase Loop Thermosyphon Through a Holistic Visualization Method

Experimental Investigation and Performance Evaluation of Parabolic Trough Solar Collector for Hot Water Generation