Abstract:The mechanical behaviors and deformation mechanisms of Chinese low activated martensitic (CLAM) steel under extreme loading conditions were systematically studied. The mechanical experiments were performed at a wide range of strain rate (from 0.001 to 3500 s -1 ) and temperature (from 300 to 1073 K). The main results show that the strength of the CLAM steel shows an apparent positive strain rate and temperature softening effect. In particular, at quasi-static loading conditions, the elongation of CLAM steel first decreases (300-673 K) and then increases (673-1073 K) with the temperature rising. Under dynamic conditions, the elongation of the CLAM steel is positively correlated with temperature rising and is larger than that under quasi-static loading conditions. The microstructure characterization results indicate that grain refinement during deformation and the positive strain rate effect on elongation are primarily governed by changes in grain size, especially at high temperatures. The relationship between the plasticity capability, precipitates and grain refinement are also analyzed. The obvious competitive mechanisms under different loading conditions in the recrystallization process of the CLAM steel. In summary, precipitates contribute to grain refinement in martensitic structures by providing nucleation sites for new grains and by obstructing dislocation movement, thereby raising the local strain and promoting dynamic recrystallization (DRX). Both of these mechanisms result in a finer and more uniform grain structure, which enhances the mechanical properties of the material, such as strength and toughness.

Effect of Strain Rate on the Mechanical Properties of Clam Steel in Liquid Pbli Eutectic

Preliminary Experiments on the Corrosion of CLAM Steel in Flowing Eutectic LiPb

Effects of Hydrogen Charging on Mechanical Properties of CLAM Steel at Different Strain Rates

Mechanism analysis of grain refinement caused by deformation and the improvement of strength and ductility of CLAM steel

Technical Issues for the Fabrication of A Cn-Hccb-Tbm Based on Rafm Steel Clf-1

Experiments on the Magnetostriction Properties of the China Low Activation Martensitic Steel

Progress in development of CLAM steel and fabrication of small TBM in China

Low Cycle Fatigue Properties of CLAM Steel at Room Temperature

Study on Corrosion Behavior of China low activation Ferritic/martensitic Steel in Static Liquid Lithium

Tensile Properties of Clam Steel Irradiated Up to 20.1 Dpa in Stip-V

Microstructure and Microhardness of CLAM Steel Irradiated Up to 20.8 Dpa in STIP-V

Evolution of interfacial microstructure and oxides of CLAM steel by hot compression bonding

Helium Irradiation-Induced Segregation and Mechanical Response in China Low Activation Martensitic (CLAM) Steel

Comprehensive improvement of strength and ductility in CLAM steel subjected to TEU: The role of heterogeneous microstructure

Microstructure Evolution and Yield Strength of CLAM Steel in Low Irradiation Condition

Effects of Yttrium and Heat Treatment on the Microstructure and Mechanical Properties of CLAM Steel

Corrosion Experiments of the Candidate Materials for Liquid Lithium Lead Blanket of Fusion Reactor

Serrated Flow and Work-Hardening Behavior of China Low Activation Martensitic Steel (CLAM)

A Study on Influence of Magnetic Field on Fracture Properties of China Low Activation Martensitic Steel

High Strain Rate Behaviour of Stainless-Clad Bimetallic Steel

Status and improvement of CLAM for nuclear application