Abstract:Over four decades ago, pulsed-laser melting, or pulsed-laser annealing as it was termed at that time, was the subject of intense study as a potential advance in silicon device processing. In particular, it was found that nanosecond laser melting of the near-surface of silicon and subsequent liquid phase epitaxy could not only very effectively remove lattice disorder following ion implantation, but could achieve dopant electrical activities exceeding equilibrium solubility limits. However, when it was realised that solid phase annealing at longer time scales could achieve similar results, interest in pulsed-laser melting waned for over two decades as a processing method for silicon devices. With the emergence of flat panel displays in the 1990s, pulsed-laser melting was found to offer an attractive solution for large area crystallisation of amorphous silicon and dopant activation. This method gave improved thin film transistors used in the panel backplane to define the pixelation of displays. For this application, ultra-rapid pulsed laser melting remains the crystallisation method of choice since the heating is confined to the silicon thin film and the underlying glass or plastic substrates are protected from thermal degradation. This article will be organised chronologically, but treatment naturally divides into the two main topics: (1) an electrical doping research focus up until around 2000, and (2) optical doping as the research focus after that time. In the first part of this article, the early pulsed-laser annealing studies for electrical doping of silicon are reviewed, followed by the more recent use of pulsed-lasers for flat panel display fabrication. In terms of the second topic of this review, optical doping of silicon for efficient infrared light detection, this process requires deep level impurities to be introduced into the silicon lattice at high concentrations to form an intermediate band within the silicon bandgap. The chalcogen elements and then transition metals were investigated from the early 2000s since they can provide the required deep levels in silicon. However, their low solid solubilities necessitated ultra-rapid pulsed-laser melting to achieve supersaturation in silicon many orders of magnitude beyond the equilibrium solid solubility. Although infrared light absorption has been demonstrated using this approach, significant challenges were encountered in attempting to achieve efficient optical doping in such cases, or hyperdoping as it has been termed. Issues that limit this approach include: lateral and surface impurity segregation during solidification from the melt, leading to defective filaments throughout the doped layer; and poor efficiency of collection of photo-induced carriers necessary for the fabrication of photodetectors. The history and current status of optical hyperdoping of silicon with deep level impurities is reviewed in the second part of this article.

Laser-doped solar cells exceeding 18% efficiency on large-area commercial-grade multicrystalline silicon substrates

Experimental Study on Copper Vapor Laser-Induced B-Doping in Si-Substrate

Improving the efficiency of crystalline silicon solar cells by an intersected selective laser doping

Improved Nanocrystal Formation, Quantum Confinement and Carrier Transport Properties of Doped Si Quantum Dot Superlattices for Third Generation Photovoltaics

Silicon Quantum Dot Based Solar Cells: Addressing the Issues of Doping, Voltage and Current Transport

Bifacial p-Type PERC Solar Cell with Efficiency over 22% Using Laser Doped Selective Emitter

Formation of Selective Emitter from Phosphorus Diffusion By Laser Doping Process

Doped Microcrystalline Silicon Layers for Solar Cells by 13.56 Mhz Plasma-Enhanced Chemical Vapour Deposition

Three-Step Process for Efficient Solar Cells with Boron-Doped Passivated Contacts

Laser Doping Selective Emitter with Thin Borosilicate Glass Layer for N-Type Topcon Solar Cells

Electrical and Optical Doping of Silicon by Pulsed-Laser Melting

Ultraviolet Laser Activation of Phosphorus‐Doped Polysilicon Layers for Crystalline Silicon Solar Cells

Multicrystalline Silicon Thin‐Film Solar Cells Based on Vanadium Oxide Heterojunction and Laser‐Doped Contacts

Silicon heterojunction back contact solar cells by laser patterning

Performance improvement of amorphous silicon see-through solar modules with high transparency by the multi-line ns-laser scribing technique

Unified Model for Laser Doping of Silicon from Precursors

Enhanced Electroluminescence from a Silicon Nanocrystal/Silicon Carbide Multilayer Light-Emitting Diode

A Novel Processing Technology for High‐Efficiency Silicon Solar Cells

Aluminum-Doped Crystalline Silicon and Its Photovoltaic Application

Laser Crystallization and Dopant Activation for a-Si:H Film in Carrier-Selective Contacts for Silicon Solar cells

An experimental investigation of spin-on doping optimization for enhanced electrical characteristics in silicon homojunction solar cells: Proof of concept