Thermodynamic assessment of a novel and efficient self-condensing transcritical CO 2 power cycle with a vortex tube
Kai Chen,Shiqiang Liang,Zhixuan Shen,Xiang Xu,Bo Wang,Yuming Zhu
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122825
IF: 6.4
2024-03-08
Applied Thermal Engineering
Abstract:This study proposes a novel, high-efficiency, self-condensing transcritical carbon dioxide (tCO 2 ) cycle utilizing a vortex tube, aimed at resolving the condensation issues within tCO 2 cycles to broaden their applicability. Firstly, the thermodynamic model of the proposed cycle was established and validated based on the first and second laws of thermodynamics. Secondly, under the basic operating conditions, this cycle demonstrates energy and exergy efficiencies of 42.00 % and 66.10 %, respectively. These efficiencies surpass those of the current self-condensing tCO 2 cycle with a vortex tube by 6.50 % and 8.85 %, the supercritical carbon dioxide (sCO 2 ) recompression cycle by 0.28 % and 0.55 %, and the sCO 2 simple recuperation cycle by 7.12 % and 9.84 %, under identical conditions. Compared to the three cycles mentioned above, our proposed cycle prevents condensation at the compressor impeller inlet due to near-critical point compression, simplifying pressurization equipment development and enhancing its stability and lifespan. Exergy analysis reveals that the turbine incurs the highest exergy losses in the system, followed by the high-temperature recuperator (HTR) and the high-pressure ratio compressor (HRC). Lastly, by using the method of controlled variables, the study explored how key operational parameters affect the performance of the proposed cycle. The results show that raising the turbine inlet temperature and the vortex tube outlet pressure significantly improves the cycle's efficiency. Optimal split ratios and optimal turbine inlet pressures were identified; notably, variations in the split ratio influence the pinch point location within the low-temperature recuperator (LTR). The impact of the vortex tube inlet temperature and pressure on the efficiency of the proposed cycle is primarily through their effect on the quality of the fluid at the nozzle outlet of the vortex tube. As the vortex tube inlet temperature approaches the critical temperature, the quality of the working fluid at the nozzle outlet decreases, the condensation performance of the vortex tube improves. As the vortex tube inlet pressure approaches the critical pressure, the quality of the fluid changes more significantly with variations in the inlet temperature.
energy & fuels,engineering, mechanical,thermodynamics,mechanics