Abstract:Graphite dust is an important issue for the operation and maintenance of high-temperature gas-cooled reactor (HTGR), because the transport of fission product (FP) is coupled closely with graphite dusts. For instance, vapor phase FP could condense as flowing through the steam generator (SG) and deposit on the surface of graphite dusts that are either air-borne or already deposited on SG tubes. In water ingress or loss-of-coolant accidents, these dusts may re-suspend and contribute to the source term. Despite the importance of graphite dusts in HTGRs, the transport and deposition of dust particle are far from being fully understood, neither particle-fluid nor particle-wall interactions. In this work we present a numerical study on the particle transport through upper 5 layers of SG tubes. Particularly, the particle impaction process is simulated by Finite Element Method (FEM) with adhesion and dissipation specially accounted. The FEM simulation predicts the critical adhesion velocity and restitution coefficient when rebound occurs. Then we substitute the particle impaction model into Eulerian-Lagrangian simulation of flow field and extract the deposition rate statistically. The result shows that for small particles (< 5 μm), the deposition rate is controlled by the collision rate, which is mainly determined by the interaction between turbulence and thermophoresis. The particle-vortex interaction is essentially important for the distribution of particles near wall and thus influences the deposition rate. For large particles the deposition rate is more affected by the sticking efficiency, which is simultaneously controlled by both the critical adhesion velocity and normal impaction velocity. Therefore, the deposition rate first increases then decreases with particle size and reaches maximum at about 5 μm.

Analysis of Graphite Dust Deposition in Hot Gas Duct of HTGR

A Parametric Study of Graphite Dust Deposition on High-Temperature Gas-Cooled Reactor (HTGR) Steam Generator Tube Bundles

A Numerical Analysis on Graphite Dust Deposition and Resuspension in HTR-10 Steam Generator

Deposition of Draphite Dust in Heat Gas Duct in HTR-10

Thermophoretic and Turbulent Deposition of Graphite Dust in Htgr Steam Generators

Effect of Particle-wall Interaction on Graphite Dust Deposition on HTGR Steam Generator Tube

Analysis of Graphite Dust Deposition in Steam Generator of Htr

Graphite Dust Deposition on HTGR Steam Generator: Effects of Particle-Wall and Particle-Vortex Interactions

NUMERICAL SIMULATION OF GRAPHITE DUST DEPOSITION IN PEBBLE BED REACTOR CORE OF HTGR

Graphite Dust Motion in Steam Generator of High Temperature Gas-cooled Reactor

Experimental study of thermophoretic deposition of HTGR graphite particles in a straight pipe

A NUMERICAL STUDY OF PARTICLE DEPOSITION THROUGH FUEL PEBBLE BED IN HTGR

Study of Graphite Dust Resuspension in Steam Generator of HTR

Graphite Dust Resuspension in an Htr-10 Steam Generator

Nuclear Graphite Wear Properties and Estimation of Graphite Dust Production in Htr-10

Study of Graphite Dust Releasing Behavior in A Depressurization Accident of Htr

A Numerical Study of Particle Deposition in HTGR Steam Generators

Motion Behavior Study of Graphite Dust Passing through Pebble Bed Structure of High Temperature Gas-cooled Reactor

Study of the Deposition of Graphite Dust in the Inlet Passageway of Intermediate Heat Exchanger in VHTR

A Numerical Study of Graphite Particle Motion on a Helium Turbine Wall in a High-Temperature Gas-Cooled Reactor System

Development of Modeling Transport of Graphite Dust in HTGR During Normal Operation Condition