Abstract:Graphite dust is an important issue for the operation and maintenance of high-temperature gas-cooled reactor (HTGR), because the transport of fission product (FP) is coupled closely with graphite dusts. For instance, vapor phase FP could condense as flowing through the steam generator (SG) and deposit on the surface of graphite dusts that are either air-borne or already deposited on SG tubes. In water ingress or loss-of-coolant accidents, these dusts may re-suspend and contribute to the source term. Despite the importance of graphite dusts in HTGRs, the transport and deposition of dust particle are far from being fully understood, neither particle-fluid nor particle-wall interactions. In this work we present a numerical study on the particle transport through upper 5 layers of SG tubes. Particularly, the particle impaction process is simulated by Finite Element Method (FEM) with adhesion and dissipation specially accounted. The FEM simulation predicts the critical adhesion velocity and restitution coefficient when rebound occurs. Then we substitute the particle impaction model into Eulerian-Lagrangian simulation of flow field and extract the deposition rate statistically. The result shows that for small particles (< 5 μm), the deposition rate is controlled by the collision rate, which is mainly determined by the interaction between turbulence and thermophoresis. The particle-vortex interaction is essentially important for the distribution of particles near wall and thus influences the deposition rate. For large particles the deposition rate is more affected by the sticking efficiency, which is simultaneously controlled by both the critical adhesion velocity and normal impaction velocity. Therefore, the deposition rate first increases then decreases with particle size and reaches maximum at about 5 μm.

Deposition of Draphite Dust in Heat Gas Duct in HTR-10

Analysis of Graphite Dust Deposition in Hot Gas Duct of HTGR

Estimation of Graphite Dust Quantity and Size Distribution of Graphite Particle in HTR-10

A Numerical Analysis on Graphite Dust Deposition and Resuspension in HTR-10 Steam Generator

Analysis of Graphite Dust Deposition in Steam Generator of Htr

Graphite Dust Motion in Steam Generator of High Temperature Gas-cooled Reactor

ICONE23-1479 THE RESEARCH PROGRESS ON THE RADIOACTIVE GRAPHITE DUST IN HTR-10

Preliminary Study Of Graphite Dust Resuspension In Steam Generator Of Htr-10

Nuclear Graphite Wear Properties and Estimation of Graphite Dust Production in Htr-10

Coagulating Evolution of Graphite Dust in Helium Flow of 10 MW High-Temperature Gas-Cooled Reactor

A Parametric Study of Graphite Dust Deposition on High-Temperature Gas-Cooled Reactor (HTGR) Steam Generator Tube Bundles

Graphite Dust Resuspension in an Htr-10 Steam Generator

Graphite Dust Deposition on HTGR Steam Generator: Effects of Particle-Wall and Particle-Vortex Interactions

The Thermohydraulics and Dynamics Study of the HTR-10 High Temperature Helium Experimental Loop

Study of Graphite Dust Releasing Behavior in A Depressurization Accident of Htr

Design and study of radioactive graphite dust experimental system in primary loop of HTR 10

A Comprehensive Study of the 14C Source Term in the 10 MW High-Temperature Gas-Cooled Reactor

Thermophoretic and Turbulent Deposition of Graphite Dust in Htgr Steam Generators

Preliminary analysis of graphite dust releasing behavior in accident for HTR

Study of Graphite Dust Resuspension in Steam Generator of HTR

Experimental study of thermophoretic deposition of HTGR graphite particles in a straight pipe