Abstract:Graphite dust is an important issue for the operation and maintenance of high-temperature gas-cooled reactor (HTGR), because the transport of fission product (FP) is coupled closely with graphite dusts. For instance, vapor phase FP could condense as flowing through the steam generator (SG) and deposit on the surface of graphite dusts that are either air-borne or already deposited on SG tubes. In water ingress or loss-of-coolant accidents, these dusts may re-suspend and contribute to the source term. Despite the importance of graphite dusts in HTGRs, the transport and deposition of dust particle are far from being fully understood, neither particle-fluid nor particle-wall interactions. In this work we present a numerical study on the particle transport through upper 5 layers of SG tubes. Particularly, the particle impaction process is simulated by Finite Element Method (FEM) with adhesion and dissipation specially accounted. The FEM simulation predicts the critical adhesion velocity and restitution coefficient when rebound occurs. Then we substitute the particle impaction model into Eulerian-Lagrangian simulation of flow field and extract the deposition rate statistically. The result shows that for small particles (< 5 μm), the deposition rate is controlled by the collision rate, which is mainly determined by the interaction between turbulence and thermophoresis. The particle-vortex interaction is essentially important for the distribution of particles near wall and thus influences the deposition rate. For large particles the deposition rate is more affected by the sticking efficiency, which is simultaneously controlled by both the critical adhesion velocity and normal impaction velocity. Therefore, the deposition rate first increases then decreases with particle size and reaches maximum at about 5 μm.

Motion Behavior Study of Graphite Dust Passing through Pebble Bed Structure of High Temperature Gas-cooled Reactor

NUMERICAL SIMULATION OF GRAPHITE DUST DEPOSITION IN PEBBLE BED REACTOR CORE OF HTGR

Graphite Dust Motion in Steam Generator of High Temperature Gas-cooled Reactor

A NUMERICAL STUDY OF PARTICLE DEPOSITION THROUGH FUEL PEBBLE BED IN HTGR

Study of Graphite Dust Releasing Behavior in A Depressurization Accident of Htr

Analysis of Graphite Dust Deposition in Steam Generator of Htr

A Parametric Study of Graphite Dust Deposition on High-Temperature Gas-Cooled Reactor (HTGR) Steam Generator Tube Bundles

A Numerical Study of Graphite Particle Motion on a Helium Turbine Wall in a High-Temperature Gas-Cooled Reactor System

Analysis of Graphite Dust Deposition in Hot Gas Duct of HTGR

Effect of Particle-wall Interaction on Graphite Dust Deposition on HTGR Steam Generator Tube

A Numerical Study of Particle Deposition in HTGR Steam Generators

Development of Modeling Transport of Graphite Dust in HTGR During Normal Operation Condition

A Numerical Analysis on Graphite Dust Deposition and Resuspension in HTR-10 Steam Generator

Graphite Dust Deposition on HTGR Steam Generator: Effects of Particle-Wall and Particle-Vortex Interactions

Resuspension of Multilayer Graphite Dust Particles in a High Temperature Gas-Cooled Reactor

Study on the resuspension of graphite dust based on the Rock'n'Roll model

Wear of Graphite Pebbles Modeled Using a Macroscopic Particle Model in a Pneumatic Transport Lifting Pipe

Nuclear Graphite Wear Properties and Estimation of Graphite Dust Production in Htr-10

Study of Graphite Dust Resuspension in Steam Generator of HTR

Study on the Effective Diffusion Coefficient of Inert Gases in Porous Graphite Materials

Study of the Behavior of Dust Particles in Helium Turbines Considering the Effects of Particle Deposition and Resuspension