Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

Stability of Slurry Trenches with Inclined Ground Surface

Rankine Theory-Based Approach for Stability Analysis of Slurry Trenches

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Instability Mechanism of Shallow Tunnel in Soft Rock Subjected to Surcharge Loads

Numerical Modeling of Soil and Structure Behavior for Tunneling in Different Types of Soil

Stability Analysis of Slurry Trenches in Similar Layered Soils

Analytical calculation of the critical inclination of rock slopes with a planar failure surface under water pressure

Limit equilibrium analysis of anisotropic soft clay stability against excavation basal heave

Evaluating Slope Stability with 3D Limit Equilibrium Technique and Its Application to Landfill in China

Analysis of Stability Against Upheaval for Foundation Pit with Anisotropic Soil Strength

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

Analytical Solution for Upheaval Buckling of Shallow Buried Pipelines in Inclined Cohesionless Soil

A Novel Method for Stability Analysis of Weakly Inclined Subgrade by Centrifuge Model Test and the Finite-Element Method

Upper-bound limit analysis of passive failure of a 3D shallow tunnel face under the bidirectional inclined ground surfaces

3-D STABILITY ANALYSIS OF SLURRY TRENCHES

Determination of Stabilizing Forces Acting on Piles to Reinforce Slurry Trench against Globe Collapse

Three-dimensional tunnel face stability considering slurry pressure transfer mechanisms

Three-dimensional stability analysis of tunnel face based on unified strength theory

Three-dimensional stability analysis of a longitudinally inclined shallow tunnel face

Upper bound stability analysis of single-layered slurry trenches in clay using the perturbation method

Calculation of Support Forces at the Excavation Face of a Shallow Buried Shield Tunnel in Dense Sandy Soil Considering Construction Disturbances