Abstract:GH4738 superalloy is a key material for gas turbine engines, yet its relatively poor thermoplasticity and narrow temperature range for hot working deteriorate grain structure uniformity and thereafter service performance. Employing hot compression experiments and finite element analysis (FEA), the present study examined the thermoplasticity of the GH4738 alloy and proposed a fast approach to establishing its dynamic recrystallization (DRX) model. The hot working conditions were considered in the 1000–1160 °C temperature range under strain rates of 2–26 s −1 up to a true compressive strain of 0.69. Friction- and temperature-corrected stress-strain curves were obtained, based on which the efficiency of power dissipation and constitutive equations were constructed. It reveals that DRX is the dominant softening mechanism in the GH4738 alloy, where the sensitivity of flow softening positively correlates with lower temperatures and higher strain rates. The appropriate hot working condition for the alloy is temperatures around 1040–1080 °C and a strain rate larger than 8 s −1 . The final grain sizes ( d ) and fractions of DRX ( Xdyn ) were minimized using the stochastic gradient descent algorithm based on 120 sets of data within the framework of the Avrami equation. It is shown that the formulated model and its integration into the FEA not only yield satisfactory agreement with the experiment but effectively avoid the complexity involved in the traditional method. The study provides key inputs for predicting the flow behavior and grain structure of the GH4738 superalloy, which shall be critical for process development and optimization of industrial manufacturing processes.

Experimental Study of Constitutive Relationship of Superalloy GH4169 Under High Strain Rates

Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behavior of nickel-based superalloy GH4145/SQ

Effect of Initial Overload on the Low Cycle Fatigue Life of Gh4169 Alloy at Different Temperatures

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Modeling the constitutive relationship of Cr 20Ni 25Mo 4Cu superaustenitic stainless steel during elevated temperature

Comparative Study on Several Constitutive Models of GCr15 Steel at High Strain Rates

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

Deformation Behavior and Constitutive Model for High Temperature Compression of a Newly Type of Ni3Al‐based Superalloy

Constitutive Model of Physical Simulation in High Speed Cutting for Al6061-T6

Thermo-Physical Simulation of the Compression Testing for Constitutive Modeling of Gh4169 Superalloy During Linear Friction Welding

Flow stress and dynamic recrystallization behavior and modeling of GH4738 superalloy during hot compression

Dynamic Deformation Mechanism for Distinct Flow Behaviors in FGH4113A Superalloy with High Γ′ Content During Isothermal Compression at Sub-/Near-/super-solvus Temperatures

Dynamic Mechanical Properties and Modified Material Constitutive Model for Hot Forged Ti2AlNb over Wide Ranges of Temperature and Strain Rate

Research and Revise on Constitutive Equation of 7050-T7451 Aluminum Alloy in High Strain Rate and High Temperature Condition

Constitutive Modeling on the Ti-6Al-4V Alloy during Air Cooling and Application

Subroutine Embedding and Finite Element Simulation of the Improved Constitutive Equation for Ti6Al4V during High-Speed Machining

Shear-compression Flow Behavior and Thermoforming Properties of GH4169 Superalloy

High-Temperature Low-Cycle Fatigue Properties of GH4169 Ni-based Superalloy

Constitutive Equation and Hot Deformation Behavior of SLM-GH3536 Alloy

Hot deformation behavior and new grain size model of hot extruded FGH4096 superalloy during hot compression

Non-Unified Constitutive Models for the Simulation of the Asymmetrical Cyclic Behavior of GH4169 at Elevated Temperatures