Wind tunnel investigation on interference effect of eight grouped super large cooling towers with rectangular arrangement

CHENG Xiaoxiang,ZHAO Lin,GE Yaojun

2013-01-01

Abstract:Based on cladding wind loads produced by simultaneous pressure measurements on a 1:200 rigid super large cooling tower model (the prototype column-supported hyperboloidal shell is of 183.89 m in height) in TJ-3 wind tunnel of Tongji University, interference effect of eight grouped cooling towers with a close rectangular arrangement was studied. Distributions of mean and fluctuating pressure coefficients around some throat sections of the principal tower were obtained firstly considering different interference effects corresponding to 128 situations (16 angles of incidence for each of the eight cooling tower positions), which accurately and straightforwardly demonstrate the unpredictable changes of wind loads among different situations. Secondly, the overall loads (mean and root-mean-square drag/lift) were calculated. To obtain better understanding of strong interference mechanism, the pressure coefficient distributions of tower No. 5 with the most adverse angle of incidence were then carefully studied. Finally, force balance tests on a 1:500 lumber tower model were applied to obtain the overall loads directly. The results show that the pressure coefficient distributions accurately and straight forwardly demonstrate the unpredictable changes of wind loads in different situations, and the simple overall loads indicate adverse situations correctly. The asymmetric feature of tower number 5's average pressure pattern in that unsafe situation is mainly caused by the accelerated flow gotten from a narrow passage between neighboring cooling towers, and the corresponding fluctuating pressure pattern is strongly influenced by the wake of an upstream interfering tower. The base balance technique can not replace the traditional pressure measurement technique at present.