Abstract:The insulation condition is the key to determining whether gas insulated switchgears (GISs) can operate stably and reliably. Partial discharge (PD) detection is an important technique for condition monitoring and evaluation in GIS. Acoustic emission (AE) method is commonly used in on-site PD detection. However, in field applications, there are often problems such as low signal-to-noise ratio (SNR) of measured ultrasonic signals and difficulty in extracting PD pulses. To solve this problem, a denoising method for GIS ultrasonic signals based on the combination of ultrasonic and ultra-high frequency (UHF) signals is proposed in this paper. Based on the difference in correlation between noise and PD signals, the noise in measured signal can be suppressed through accumulating and averaging of multiple ultrasonic signals, and the SNR of PD signal can be significantly improved. An actual 500-kV GIS experiment platform is established, and PD measurements for different types of defects are conducted. Then, a comparative study is conducted on the denoising performance of the proposed method and traditional denoising methods such as wavelet method and singular value decomposition (SVD) method. The results indicate that compared to traditional methods, the method proposed in this paper has a higher reduction in noise level. Especially for extremely low-SNR signals (PD pulses buried in noise), traditional methods have poor performance, while the proposed method can still extract the PD pulse form the noise. Furthermore, based on the denoised ultrasonic signals, the defect localization analysis is conducted to demonstrates the correctness of the denoising results. Finally, the proposed method is applied to on-site PD detection, which further evaluates the effectiveness of the denoising method.

Medium Voltage Cable Partial Discharge Signals Denoising by Second Generation Wavelet Packet Transform.

Analysis of Partial Discharge Detection in Power Cable by WTST-NST Filter Technology

Application of Wavelet on Retaining the Shape of Partial Discharge Pulse of Power Cables

On-line partial discharge monitoring system and data processing using WTST-NST filter for high voltage power cable

Partial discharge location of power cables based on an improved single-terminal method

Signal Processing of On-line Partial Discharge Measurements On HV Power Cables

A Wavelet Transform Approach to Adaptive Extraction of Partial Discharge Pulses from Interferences

A New Technique For Extracting Partial Discharge Signals In On-Line Monitoring With Wavelet Analysis

Extraction of partial discharge pulse via wavelet shrinkage

Study on a Spatially Selective Noise Filtration Technique for Suppressing Noises in Partial Discharge On-Line Monitoring

Novel Denoizing Method for Partial Discharge Signals Using Singular Value Decomposition and Spectral Subtraction

Partial Discharge Signal Denoising with Recursive Continuous S-Shaped Algorithm in Cables

An Automatic Tool for Partial Discharge De-Noising via Short-Time Fourier Transform and Matrix Factorization

The Denoising Method for Transformer Partial Discharge Based on the Whale VMD Algorithm Combined with Adaptive Filtering and Wavelet Thresholding

A novel wavelet transform technique for on-line partial discharge measurements. 1. WT de-noising algorithm

Intelligent Morphological Filter Applied To The Signal Processing Of Partial Discharge For Xlpe Cable

A Denoising Method for Partial Discharge Ultrasonic Signals in GIS Based on Ultra-High Frequency Signal Synchronization

Wavelet transform applying in partial discharge measurement

A Denoising Method for Mining Cable PD Signal Based on Genetic Algorithm Optimization of VMD and Wavelet Threshold

WAVELET TRANSFORM BASED DE-NOISE ALGORITHM BY THRESHOLDING IN ON-LINE PARTIAL DISCHARGE DETECTION

DSP Based On-Line Partial Discharge Monitoring System for High Voltage Power Cable