Abstract:The large vertical centrifugal pump is the core power equipment for long-distance water division and large-scale irrigation projects. The power of the matching motor can reach 40 MW. In view of reducing the operating energy consumption of this kind of pump, the efficiency under the design condition was taken as the optimization objective, and a matching optimization on hydraulic components was proposed in this research. The optimization process was divided into two stages. The first stage focused on improving the configuration of the vane diffuser. In the second stage, the Plackett-Burman test design was used to screen out the optimization design variables of the vane diffuser and the volute, the optimal Latin hypercube sampling method was adopted to generate 106 sample cases, and an automatic numerical simulation optimization platform was built. Then, different approximate models were employed to construct the relationship between the optimization design variables and the objective function, and their fitting accuracy and robustness were compared. Finally, the optimal design parameters were determined by particle swarm optimization, and entropy production theory was used to analyze the internal flow pattern of the model before and after optimization. Results showed that D3, b4, β3, and S8 have the greatest impact on the hydraulic efficiency of the pump. The multilayer backpropagation neural network has a higher fitting accuracy and better robustness compared with the other three approximate models. The efficiency of the optimized model under the design condition is increased by 4.22 %, reaching 90.82 %. Reducing the number of layers and vanes of the diffuser and improving the matching of hydraulic components can dramatically improve the hydraulic performance and hump characteristics of large vertical centrifugal pumps. Entropy production theory is a reliable approach to visualizing flow loss. The turbulent flow dissipation in the vane diffuser can be reduced the most after optimization.

Clearance Optimization of a Loader Used Hydraulic Gear Pump Based on Actual Measured Data and Genetic Algorithm

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Design, Modeling, and Pressure Control of a 300-Kw-class Hydraulic Pump/motor Loading System with Energy Regeneration

The Optimization of A Low Specific Speed Pipeline Pump

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Hydraulic components’ matching optimization design and entropy production analysis in a large vertical centrifugal pump

Power Optimization Of Series Hydraulic Hybrid Powertrain For Compact Wheel Loader

Intelligent optimization of axial-flow pump using physics-considering machine learning

Optimization Research Of Parallel Pump System For Improving Energy Efficiency

Flow Field Modeling and Simulation of High-Speed Gear Pump Considering Optimal Radial and End Clearance

Optimization of Cross Angle Based on the Pumping Dynamics Model

Multi-Point Optimization on the Diffuser of an Axial Flow Pump

Characteristics of Volumetric Losses and Efficiency of Axial Piston Pump with Respect to Displacement Conditions

Hydraulic performance prediction and optimization of an engine cooling water pump using computational fluid dynamic analysis

Optimization of Hydraulic Efficiency and Internal Flow Characteristics of a Multi-Stage Pump Using RBF Neural Network

Analysis of the Influence Laws of Inlet Condition on the Volumetric Efficiency of the High-Speed Fuel Gear Pump

Optimization on High-Pressure Side of Pump-Turbine Runner Based on High Efficiency and Stability Criterion Via Multi-Objective Genetic Algorithm Method

Optimization of Pump Turbine Closing Operation to Minimize Water Hammer and Pulsating Pressures During Load Rejection

Tip Clearance Optimization of High Speed Engine Pump Based on Simulation and Experimental Verification