Abstract:In china, many thermal power plants have to burn blended coals forced by the complexity of coal type and market tension and transportation pressure of coal purchasing. As a engineering implementation method of coal blending," different coals grinding in different mills and then mixed burning in the furnace" has many advantages such as low investment, easy to control milling system parameters and can be optimized online, etc, compared with traditional coal blending methods. But it is limited by the number of mills and cannot achieve high-precision ratio of blending. To remedy this shortcoming, a model of two-level optimization of coal blending for the thermal power plant with direct blowing pulverizing system was established in this paper. The tradional coal blending was regarded as first step of optimization. The secondary optimization was implemented by adjusting the outputs of different mills, then the blend was changed to accurate ratio. Furthermore, since the existence of coal bunker, it made a time lag from coal discharge to combustion, meanwhile, the real-time load was unpredictable and the coal utilization rate was inconsistent of each bunker. The three reasons make it uncertain of the current coal of bunker. To identify each coal in the mill(equivalent to bunker) correctly was the basis of achieving the second blending optimization. Therefore, a soft-sensing model of coal moisture based on the heat balance equation was used to take this work. At last, a intelligent coal blending system by the two-level optimization model was developed for a power plant and achieved good results.

A New Estimation Method for the Powder Amount of A Coal Pulverizer with Double Inputs and Double Outputs

Optimization on plant-level AGC coal consumption curve based on operation mode of pulverizing systems

Impact of Coal Types and Pulverizing Methods on the Thermal Performance of Blending Coal-Fired Boilers and Their Operational Optimization

Modeling and Application of Coal Pulverizing System for Coal-Fired Power Plant

An Investigation of New Methods for Attaining an Optimized Operation of Small and Medium-sized Pulverized Coal-fired Boilers

Study And Application Of Two-Level Optimization Of Coal Blending For Power Plant Based On On-Line Coal Identification

Modelling and control of pulverizing system considering coal moisture

Combinatorial optimization of pulverizers for blended-coal-fired power plant

STUDY ON TECHNOLOGY OF MEASURING PULVERIZED COAL CONCENTRATION BY USING MOMENTUM METHOD IN DUST-COAL TRANSPORTING PIPELINE FOR UTILITY BOILERS

Coal Mill Model Considering Heat Transfer Effect on Mass Equations with Estimation of Moisture

An In-Situ Calorimeter for Coal Powder: A Numerical Investigation

Theoretical Derivation of Principal Factor Method in the Optimization of Medium Sized Pulverized Coal Fired Boiler Operation

Coal-fired power plant boiler combustion process modeling based on support vector machine and load data division

Calculation on effective heat of injected pulverized coal in blast furnace

Electrostatic monitoring of coal velocity and mass flowrate at a power plant

Mathematical modeling and model predictive control research on coal powder burners for aggregate dryers

A Study of the Dynamic Modeling of a Medium Speed Pulverizer Based on On-site Data

Studies of Pulverized Coal Concentration Measurement in 660MW Boiler Coal Pipe

Measurement of the Mass Flow and Velocity Distributions of Pulverized Fuel in Primary Air Pipes Using Electrostatic Sensing Techniques

Pulverized coal flow metering on a full-scale power plant using electrostatic sensor arrays

Study on Optimization of Soot Blowing Based on Monitoring Model of Coal-Fired Power Station Soot Accumulation