Abstract:Currently, there are various types of microscales and the conventional line detection system usually has only one detection method, which is difficult to adapt to the diverse calibration needs of microscales. This article investigates the high-precision measurement method of a microscale based on optoelectronics and the image integration method to solve the diversified calibration needs of microscales. The automatic measurement and processing system integrates two methods: the photoelectric signal measurement method and the photoelectric image measurement method. This article studies the smooth motion method based on ordinary linear guides, investigates the method of reducing the cosine error of a small-range interference length measurement, proposes an image-based line positioning method, and studies the edge and center recognition algorithms of the line. According to the experimental data, the system's measurement accuracy was analyzed using the photoelectric signal measurement method to measure the 1 mm microscale, the maximum difference from the reference value was 0.105 μm, the standard uncertainty was 0.068 μm, and the absolute value of normalized error was less than 1. The accuracy of the image measurement method to measure the 1 mm microscale was consistent with that of the photoelectric signal method. The results show good consistency in the measurement results between the two methods of the integrated measurement system. The photoelectric signal method has the technical characteristics of high measurement efficiency and high accuracy, while the pixel-based measurement of the image method has two-dimensional measurement characteristics, which can realize measurements that cannot be realized by the photoelectric signal method; therefore, the measurement system of optoelectronics and image integration is characterized by high precision and a wide range of measurement adaptations.

Calibration method for automatic optical measurement instrument of precipitation based on linear CCD

Line Structured Light Calibration System Based on Planar Complementary Target

Fast and High-Accuracy Spectral Measurements of LED by Linear CCD Sensor and Software Calibration

Calibration for the Errors Resulted from Aberration in Long Focal Length Measurement

Calibration Method for High-Accuracy Measurement of Long Focal Length with Talbot Interferometry.

Measuring Spectral Reflectance and Transmittance of Heavy Caliber Optical Thin-Film

Study on Calibration Method for the Performance Index of SPR Sensors

An adaptive calibration algorithm for projected images in daily environment.

[Techniques for Pixel Response Nonuniformity Correction of CCD in Interferential Imaging Spectrometer].

Measurement and error analysis on color uniformity of LCD projector

Pixel Response Nonuniformity Correction of CCD in Fourier Transform Imaging Spectrometer

Improvement of the Measurement Precision of Light Beam Center by Linear CCD

Laboratory Calibration of Star Tracker with Brightness Independent Star Identification Strategy

High-Precision Measurement of Microscales Based on Optoelectronics and Image Integration Method

Review of Calibration and Improvement Methods of Light- Scattering Airborne Particle Concentration

Laboratory Radiometric Calibration Technique of an Imaging System with Pixel-Level Adaptive Gain

Accuracy calibration of the multi-light screen measurement system using array optical signal

Calibration and Error Analysis for Multi-wavelength Sun-Photometer Observations

Research on spectral signal calibration method of ink composition test system based on composite filter

Experimental research of spray component concentrations by multi-rainbow spectral-situ measurement with self-calibration method

Calibration of a structure light based windshield inspection system