Abstract:[Continuous mixing equipment is widely used in polymer processing. Typical continuous mixers include single screw and twin screw extruders. The flow field in these mixing devices is difficult to analyze due to the complex geometry. In this work, a fluid dynamics analysis package-FIDAP, using the finite element method, was implemented to simulate the three dimensional, isothermal flow patterns in the region of conveying elements and shearing discs of a Leistritz intermeshing counterrotating twin screw extruder model LSM30.34, a 2{dollar}{bsol}sp{lcub}{bsol}prime{bsol}prime{rcub}{dollar} Welding Engineers tangential counterrotating twin screw extruder and the MCT section of a Multi-Cut Transfermix extrusion system. The rheology of the fluid was described by a power-law model. The problem of time dependent flow boundaries was solved by selecting a number of sequential geometries to represent a complete mixing cycle. The dispersive mixing in the region of conveying elements and shearing discs of the intermeshing counterrotating twin screw extruder was characterized in terms of shear stresses generated in the flow field and a parameter {dollar}{bsol}beta{dollar} quantifying the elongational flow components. The influence of screw rotational speed and axial pressure difference on these flow characteristics was analyzed. Comparisons of the flow characteristics in the regio n of conveying elements and in the shearing discs, and between corotating and counterrotating modes in the shearing discs were also presented. A framework was developed to evaluate distributive mixing efficiency in the intermeshing and tangential counterrotating twin screw extruders and in the Multi-Cut Transfermix. The dynamics of distributive mixing was studied numerically by means of tracking the evolution of particles originally gathered as clusters. The extent or goodness of mixing was characterized in terms of length stretch, pairwise correlation function and volume fraction of islands. The length stretch reflects the capability of the mixer to spread particles away from their neighbors initially present in the same cluster. The pairwise correlation function characterizes the global distribution of particles in the mixing region. The volume fraction of islands quantifies the regions void of minor component and provides a more local mixing analysis. This framework can then be used to differentiate among various operating conditions or various designs of the same type of equipment. Moreover, this framework can also be applied to other batch or continuous mixing equipment with some minor modifications]

Effects of Screw Clearance and Blend Ratio on the Flow and Mixing Characteristics of Tri-Screw Extruders in Cross Section with CFD

Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder

In-line measurement apparatus for residence time distribution in twin-screw extruder and its application in polymer processing

Study of Dynamic Flow and Mixing Performances of Tri-Screw Extruders with Finite Element Method

Effect of Dynamic Center Region on the Flow and Mixing Efficiency in a New Tri-Screw Extruder Using 3D Finite Element Modeling

A Method for Assessing Micromixing in TSE and Its Application

Mixing performance in a miniature conical twin screw extruder with batch filling

Analysis of the Dispersive and Distributive Mixing Effect of Screw Elements on the Co-Rotating Twin-Screw Extruder with Particle Tracking

CFD Simulation of Shear Flow and Mixing in a Taylor–Couette Reactor with Variable Cross-Section Inner Cylinders

Three-dimensional Numerical Study of the Mixing Behaviour of Twin-screw Elements

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Numerical study of mixing dynamics inside the novel elements of a corotating nontwin screw extruder

Numerical Simulation and Experimental Validation of Mixing Performance of Kneading Discs in A Twin Screw Extruder

Mixing and Thermal Transport Behavior in a Pin or Non-Pin Extruder Equipped with a Field Synergy Elongation Screw

Computer Simulation of Extrusion Process of Intermeshing Co-Rotating Twin Screw Extruders

Investigating the effects of material properties on the mixing dynamics of cohesive particles in a twin screw mixer using a discrete element method approach

Optimization of baffle's height in an asymmetric twin-screw extruder using the response surface model

Analysis on Melting Mechanism in the Cross Section of Co-Rotating Twin Screw Extruder

Simulation of High-Viscosity Generalized Newtonian Fluid Flows in the Mixing Section of a Screw Extruder Using the Lattice Boltzmann Model

Two-relaxation-time lattice Boltzmann model of the velocity profiles and volumetric flow rate of generalized Newtonian fluids in a single-screw extruder

Analysis of Mixing Efficiency in Continuous Polymer Processing Equipment