Abstract:[Continuous mixing equipment is widely used in polymer processing. Typical continuous mixers include single screw and twin screw extruders. The flow field in these mixing devices is difficult to analyze due to the complex geometry. In this work, a fluid dynamics analysis package-FIDAP, using the finite element method, was implemented to simulate the three dimensional, isothermal flow patterns in the region of conveying elements and shearing discs of a Leistritz intermeshing counterrotating twin screw extruder model LSM30.34, a 2{dollar}{bsol}sp{lcub}{bsol}prime{bsol}prime{rcub}{dollar} Welding Engineers tangential counterrotating twin screw extruder and the MCT section of a Multi-Cut Transfermix extrusion system. The rheology of the fluid was described by a power-law model. The problem of time dependent flow boundaries was solved by selecting a number of sequential geometries to represent a complete mixing cycle. The dispersive mixing in the region of conveying elements and shearing discs of the intermeshing counterrotating twin screw extruder was characterized in terms of shear stresses generated in the flow field and a parameter {dollar}{bsol}beta{dollar} quantifying the elongational flow components. The influence of screw rotational speed and axial pressure difference on these flow characteristics was analyzed. Comparisons of the flow characteristics in the regio n of conveying elements and in the shearing discs, and between corotating and counterrotating modes in the shearing discs were also presented. A framework was developed to evaluate distributive mixing efficiency in the intermeshing and tangential counterrotating twin screw extruders and in the Multi-Cut Transfermix. The dynamics of distributive mixing was studied numerically by means of tracking the evolution of particles originally gathered as clusters. The extent or goodness of mixing was characterized in terms of length stretch, pairwise correlation function and volume fraction of islands. The length stretch reflects the capability of the mixer to spread particles away from their neighbors initially present in the same cluster. The pairwise correlation function characterizes the global distribution of particles in the mixing region. The volume fraction of islands quantifies the regions void of minor component and provides a more local mixing analysis. This framework can then be used to differentiate among various operating conditions or various designs of the same type of equipment. Moreover, this framework can also be applied to other batch or continuous mixing equipment with some minor modifications]

In-line measurement apparatus for residence time distribution in twin-screw extruder and its application in polymer processing

Evolution of residence time distribution and fill degree in co-rotating twin-screw extruder

Assessing Local Residence Time Distributions in Screw Extruders Through a New In‐line Measurement Instrument

Local residence time distribution in twin-screw extruder

A Method for Assessing Micromixing in TSE and Its Application

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Local Residence Time, Residence Revolution, and Residence Volume Distributions in Twin-Screw Extruders

In-line Near-Infrared Spectroscopy for Measuring the Composition, Compositional Fluctuation and Mixedness of Polymer Blends in a Twin Screw Extruder

THE DEVELOPMENT OF SIMULATION OF RESIDENCE TIME DISTRIBUTION IN SCREW EXTRUDERS

On-line Fast Detection and Control of Composition for Binary Gas-Phase Copolymerization of Olefins

Hydrodynamics and Film Formation Characteristics in a Horizontal Self‐cleaning Twin‐shaft Kneader for Polymer Devolatilization

Computer Simulation of Extrusion Process of Intermeshing Co-Rotating Twin Screw Extruders

A comprehensive review on residence time distributions in co-rotating twin-screw extrusion

Numerical Simulation and Experimental Validation of Mixing Performance of Kneading Discs in A Twin Screw Extruder

Qualitative study on intermeshing co-rotating twin screw extrusion using novel visual technique

In Situ Raman Spectroscopy Real-Time Monitoring of a Polyester Polymerization Process for Subsequent Process Optimization and Control

Development of A Reactive Compatibilizer-Tracer for Studying Reactive Polymer Blends in A Twin-Screw Extruder

Residence Time Distribution for Evaluating Flow Patterns and Mixing Actions of Rice Extruded with Thermostable Α-Amylase

Analysis of Mixing Efficiency in Continuous Polymer Processing Equipment

Interaction effect between influence factors of residence time distribution in twin screw extruder

Effects of Screw Clearance and Blend Ratio on the Flow and Mixing Characteristics of Tri-Screw Extruders in Cross Section with CFD