Abstract:Aseptic loosening and osteolysis continue to be a short- to mid-term problem for total ankle replacement (TAR) devices. The production of wear particles may contribute to poor performance, but their characteristics are not well understood. This study aimed to determine the chemical composition, size and morphology of wear particles surrounding failed TARs. A recently developed wear particle isolation method capable of isolating both high- and low-density materials was applied to 20 retrieved periprosthetic tissue samples from 15 failed TARs of three different brands. Isolated particles were imaged using ultra-high-resolution imaging and characterised manually to determine their chemical composition, size, and morphology. Six different materials were identified, which included: UHMWPE, calcium phosphate (CaP), cobalt chromium alloy (CoCr), commercially pure titanium, titanium alloy and stainless steel. Eighteen of the 20 samples contained three or more different wear particle material types. In addition to sub-micron UHMWPE particles, which were present in all samples, elongated micron-sized shards of CaP and flakes of CoCr were commonly isolated from tissues surrounding AES TARs. The mixed particles identified in this study demonstrate the existence of a complex periprosthetic environment surrounding TAR devices. The presence of such particles suggests that early failure of devices may be due in part to the multifaceted biological cascade that ensues after particle release. This study could be used to support the validation of clinically-relevant wear simulator testing, pre-clinical assessment of fixation wear and biological response studies to improve the performance of next generation ankle replacement devices. STATEMENT OF SIGNIFICANCE: Total ankle replacement devices do not perform as well as total hip and knee replacements, which is in part due to the relatively poor scientific understanding of how they fail. The excessive production of certain types of wear debris is known to contribute to joint replacement failure. This is the first study to successfully isolate and characterise high- and low-density wear particles from tissues collected from patients with a failed total ankle replacement. This article includes the chemical composition and characteristics of the wear debris generated by ankle devices, all of which may affect their performance. This research provides clinically relevant reference values and images to support the development of pre-clinical testing for future total ankle replacement designs.

Research on the Isolation and Biological Reaction of Nano-Wear Debris from Artificial Joint

Isolation and description of the artificial joint wear debris

Advances in artificial joint bio-friction and wear simulation assessment technology

Nano wear particles and the periprosthetic microenvironment in aseptic loosening induced osteolysis following joint arthroplasty

A Transmission Electron Microscopic Study on Biological Reaction of Synovitis Induced by Wear Particles from Joint Prosthesis

A Comprehensive Biological Evaluation of Ceramic Nanoparticles As Wear Debris

Combined Tribological and Bactericidal Effect of Nanodiamonds as a Potential Lubricant for Artificial Joints

A Study on Extraction of Artificial Joint Wear Debris Enhanced by Ultrasonic Wave

Mixed material wear particle isolation from periprosthetic tissue surrounding total joint replacements

Simultaneous Characterization of Implant Wear and Tribocorrosion Debris within Its Corresponding Tissue Response Using Infrared Chemical Imaging

Research Status of Artificial Joint Materials

Isolation and characterisation of wear debris surrounding failed total ankle replacements

Nanoscale ZnO doping in prosthetic polymers mitigate wear particle-induced inflammation and osteolysis through inhibiting macrophage secretory autophagy

Translational Characterization of Macrophage Responses to Stable and Non-Stable CoCrMo Wear and Corrosion Debris Generated In-Situ for Total Hip Replacement

[Antifriction and anti-wear performances of bionic lubricating fluid containing gelatin nanoparticles for artificial joint materials]

Aseptic and septic prosthetic joint loosening: Impact of biomaterial wear on immune cell function, inflammation, and infection

Tribological and Electrochemical Studies on Biomimetic Synovial Fluids

Tuning the tribofilm nanostructures of polymer-on-metal joint replacements for simultaneously enhancing anti-wear performance and corrosion resistance

Effect of different loads on wear mechanisms of polyether-ether-ketone in normal saline and debris-isolating method

Ceramic–Titanium Alloy Artificial Hip Joint Wear Simulation and Experimental Study

Nanoparticle-Containing Hyaluronate Solution for Improved Lubrication of Orthopedic Ceramics