Abstract:BACKGROUND:During joint replacement, different materials of prosthesis can be used. Different prosthesis can produce different effects and the stress distribution of bone interface. OBJECTIVE:To explore the effects of different materials on the stress distribution and biomechanics of the bone interface of artificial hip joint. METHODS:The CT scan of the hip was carried out. The image data were saved in DICOM format and processed by MIMICS software. The 3D finite element model of the femur was obtained by ANSYS. A three dimensional finite element model of the femur was made with the material properties of the femur. Three kinds of different replacement prosthesis materials (Co Cr Mo aloy, titanium aloy and composite materials) were selected, and the specific requirements of the actual joint replacement were selected, and different types of prosthesis were designed in CAE software. In the STL format, the prosthesis model was imported into MIMICS, and the femur and prosthesis were assembled. The stress status of different prosthesis was analyzed, and the stress shielding rates of exterior and interior sides of middle and lower parts of the femur, right to and 30 mm below lesser trochanter and right to lesser trochanter of the proximal femur were calculated. RESULTS AND CONCLUSION:Through three-dimensional finite element analysis, a direct and accurate model of the femur and the three-dimensional model of the prosthesis were established. According to the actual situation, material assignment of the femoral three-dimensional finite element model was conducted to obtain the corresponding model. Thus, the properties of different materials of the femur were shown visualy. The femoral stress of cobalt chromium molybdenum aloy, titanium aloy, and composite material was simulated after replacement. Results found that the stress shielding rate can decrease in the middle and lower parts of the femur. After replacement, the femoral stress is higher than that of the intact femur. The experimental results show that the stress shielding of the joint was performed after joint replacement with Co Cr Mo aloy, titanium aloy and composite materials. Among them, the composite material is more close to the actual physiological environment of the human body, and it can better reduce the stress shielding effect, and is beneficial to the stress from the prosthesis to the femur.

Research Status of Artificial Joint Materials

Research Progress in the Artificial Hip Joint Prostheses

Advances in artificial joint bio-friction and wear simulation assessment technology

Artificial Hip Joints: the Biomaterials Challenge.

Hot issues related to modern hip prosthetic materials

Tribological Research Status of Polymeric Artificial Articular Materials

In vitro evaluation of artificial joints: a comprehensive review

The research progress offriction and wear properties of polyetheretherketone and its modified materials for artificial j oints

Advancement in biomedical implant materials-a mini review

Physically Cross-Linked Organo-Hydrogels for Friction Interfaces in Joint Replacements: Design, Evaluation and Potential Clinical Applications.

Brief discussion on present status and future of joint replacement in China

Development and Application of New Type Titanium Alloy for Artificial Joint Material

Research progress in titanium alloy in the field of orthopaedic implants

Clinical Application and Biological Functionalization of Different Surface Coatings in Artificial Joint Prosthesis: A Comprehensive Research Review

Investigation on the Biotribology of the Modified Artificial Joint Materials

UHMWPE Biomaterials for Joint Implants: Structures, Properties and Clinical Performance

ADVANCES IN BIOMECHANICS RELATED WITH ARTIFICIAL KNEE REPLACEMENT

New prospects for a prolonged functional life-span of artificial hip joints by using the material combination polyethylene/aluminium oxide ceramin/metal

[Progress of Hip Resurfacing Arthroplasty].

Tribological Study on the Surface Modification of Metal-on-polymer Bioimplants

Effects of different materials on stress distribution and biomechanics of bone interface of artificial hip joint